Datasheet > HEMP106G-S240440-8

HEMP106G-S240440-8

更新时间： 2022-02-26 09:30:10

品牌	Logo	应用领域
HITRON		输入元件
页数	文件大小	规格书
2页	108K
描述
ACCOMMODATE UNIVERSAL AC INPUT

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

HEMP106G-S240440-8 数据手册

浏览型号HEMP106G-S240440-8的Datasheet PDF文件第2页

H HiTRON

UNIVERSAL INPUT HARMONIC CORRECTION (PFC)

AC-DC MEDICAL APPLICATION EXTERNAL DESKTOP

SWITCHING ADAPTER 90-106 WATTS GREEN POWER

SINGLE OUTPUT HEMP106G SERIES

FEATURES:



ACCOMMODATE UNIVERSAL AC INPUT

NO LOAD POWER CONSUMPTION<0.21W

ENERGY EFFICIENCY LEVEL VI

MEET MEDICAL STANDARDS IEC60601-1

EMI MEET EN55011 / FCC CLASS B

CE MARKING COMPLIANCE

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: Typical 90-264Vac with PFC.

Input Connector: 3 pole AC inlet IEC320-C6(DT7L) /

2 pole AC inlet IEC320-C8(DT8).

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Wattage: Typical 90-106 Watts.

Output Connector: Optional.

Input Frequency: 47-63Hz.

Inrush Current: 7.2Arms at 230Vac 50Hz.

Input Current: Typical 1.044A at 115Vac

Typical 0.543A at230Vac

Dielectric Withstand: Meet IEC60601-1.

EMI: Meet EN55011 FCC Class B.

Line Regulation: Typical 0.3 %.

Load Regulation: Typical ± 2~3 %.

Noise & Ripple: Typical 1% peak to peak.

OVP: Built-in. (Latch)

Adjustability: Not available.

Hold-up Time: Typical 22mS at 115Vac/ 43mS at 230Vac. Over Temp. Protection (OTP): Installed.

Power Factor & Harmonic Correction:

Overload Protection (OLP):

Meet IEC 61000-3-2, PF typical 0.98 at full load.

Earth Leakage Current: Less than 0.13mA.

No Load Power: Typical 0.21W at 115Vac&230Vac.

Fully protected against output overload and short circuit.

OLP set at about 110-135% rating output wattage.

Consult the factory for OLP setting.

GENERAL SPECIFICATION

Efficiency: Typical 88-91%. (various with output voltage)

Switching Frequency: 60 KHz.

Circuit Topology: Fixed Flyback circuit.

Transient Response: Output voltage returns in less than

1mS following a 25% load change.

Operating Temperature: -20 to +40°C.

Storage Temperature: -40 to +85°C.

Cooling: Free air convection.

Construction: Impact resistant plastic enclosure case.

Power Density: 4.9-5.8 Watts/Cubic inch.

Desktop Format.

Safety Standard: Meet Medical standards UL60601-1 /

EN60601-1 Class I or II.

NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.

(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load varied from half load to full load (%).

(3) The exact obtainable load regulation depends upon the output cord selected and load current.

(4) Due to requests in market and advances in technology, specifications subject to change without notice.

Edited on 7^thApril, 2015

-1-

下载PDF

与HEMP106G-S240440-8相关器件

型号	品牌	描述	获取价格	数据表
HEMP106G-S360290-7L	HITRON	ACCOMMODATE UNIVERSAL AC INPUT	获取价格
HEMP106G-S360290-8	HITRON	ACCOMMODATE UNIVERSAL AC INPUT	获取价格
HEMP106G-S480220-7L	HITRON	ACCOMMODATE UNIVERSAL AC INPUT	获取价格
HEMP106G-S480220-8	HITRON	ACCOMMODATE UNIVERSAL AC INPUT	获取价格
HEMP150G	HITRON	UNIVERSAL INPUT HARMONIC CORRECTION (PFC)	获取价格
HEMP150G-S120100-7	HITRON	UNIVERSAL INPUT HARMONIC CORRECTION (PFC)	获取价格