5秒后页面跳转
HCS361-/P PDF预览

HCS361-/P

更新时间: 2024-01-31 11:43:27
品牌 Logo 应用领域
美国微芯 - MICROCHIP 存储
页数 文件大小 规格书
28页 397K
描述
TELECOM, DATA ENCRYPTION CIRCUIT, PDIP8, 0.300 INCH, PLASTIC, DIP-8

HCS361-/P 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SOIC
包装说明:SOP,针数:8
Reach Compliance Code:compliantHTS代码:8542.39.00.01
风险等级:5.07JESD-30 代码:R-PDSO-G8
JESD-609代码:e3长度:4.9 mm
湿度敏感等级:1功能数量:1
端子数量:8最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:SOP封装形状:RECTANGULAR
封装形式:SMALL OUTLINE峰值回流温度(摄氏度):260
认证状态:Not Qualified座面最大高度:1.75 mm
最大压摆率:1.6 mA标称供电电压:5 V
表面贴装:YES电信集成电路类型:DATA ENCRYPTION CIRCUIT
温度等级:INDUSTRIAL端子面层:Matte Tin (Sn)
端子形式:GULL WING端子节距:1.27 mm
端子位置:DUAL处于峰值回流温度下的最长时间:40
宽度:3.9 mmBase Number Matches:1

HCS361-/P 数据手册

 浏览型号HCS361-/P的Datasheet PDF文件第2页浏览型号HCS361-/P的Datasheet PDF文件第3页浏览型号HCS361-/P的Datasheet PDF文件第4页浏览型号HCS361-/P的Datasheet PDF文件第5页浏览型号HCS361-/P的Datasheet PDF文件第6页浏览型号HCS361-/P的Datasheet PDF文件第7页 
HCSXXX  
HCSXXX Memory Programming Specification  
This document includes the  
programming specifications for the  
following devices:  
1.2  
Program/Verify Mode  
The Program/Verify mode for the KEELOQ devices  
allows programming for all memory locations within the  
device being programmed. With the exception of the  
decoders, these pins are also used to verify the memory  
arrays.  
• HCS200  
• HCS201  
• HCS300  
• HCS301  
• HCS320  
• HCS360  
• HCS361  
• HCS362  
• HCS410  
• HCS412  
• HCS500  
• HCS512  
• HCS515  
1.0  
PROGRAMMING THE HCSXXX  
®
All of the KEELOQ devices are programmed using a  
serial method. This Serial mode allows KEELOQ  
devices to be programmed while in users' systems,  
which increases the flexibility of designing  
cryptographic encoders, decoders and transponders  
into electronic systems. While some of the devices are  
capable of being programmed through wireless  
communications, the subject of this document is  
focused on wired programmers that make contact with  
the KEELOQ products while the components are in-  
circuit or in a programmer socket. Additionally, this  
programming specification only applies to all KEELOQ  
devices listed above in all packages.  
Note:  
For the purpose of this document,  
“KEELOQ devices” and “KEELOQ products”  
refers to all of the components listed  
above.  
1.1  
Programming Algorithm  
Requirements  
Depending on the device being programmed, the  
method for entering Programming mode can be  
achieved through the use of a combination of logic level  
signals applied to the programming pins. One or two  
pins are capable of accepting clock signals, while  
another pin is dedicated to bidirectional data. These  
pins are detailed in Table 1-1.  
Additionally, the programming voltage range for VDD is  
+5V ± 10% for all the KEELOQ devices. There is not a  
requirement to apply high voltages to any of the pins  
beyond the level of VDD in order to enter the  
Programming mode. For more details about pin  
configurations during programming, refer to Table 1-1.  
2004 Microchip Technology Inc.  
Preliminary  
DS41256A-page 1  

与HCS361-/P相关器件

型号 品牌 获取价格 描述 数据表
HCS361/SN ETC

获取价格

REMOTE-CONTROL TRANSMITTER/ENCODER|CMOS|SOP|8PIN
HCS361-/SN MICROCHIP

获取价格

TELECOM, DATA ENCRYPTION CIRCUIT, PDSO8, 0.150 INCH, PLASTIC, SOIC-8
HCS361_11 MICROCHIP

获取价格

KEELOQ® Code Hopping Encoder incorporates hi
HCS361-I/P ETC

获取价格

REMOTE-CONTROL TRANSMITTER/ENCODER|CMOS|DIP|8PIN
HCS361-I/SN ETC

获取价格

REMOTE-CONTROL TRANSMITTER/ENCODER|CMOS|SOP|8PIN
HCS361-IP MICROCHIP

获取价格

KEELOQ CODE HOPPING ENCODER
HCS361-ISN MICROCHIP

获取价格

KEELOQ CODE HOPPING ENCODER
HCS361-P MICROCHIP

获取价格

KEELOQ CODE HOPPING ENCODER
HCS361-SN MICROCHIP

获取价格

KEELOQ CODE HOPPING ENCODER
HCS361T-I/SNC27 MICROCHIP

获取价格

TELECOM, DATA ENCRYPTION CIRCUIT, PDSO8, 0.150 INCH, PLASTIC, SOIC-8