HC9 Series
High Current 9 Power Inductors
• Design utilizes high temperature powder iron material
with a non-organic binder to eliminate thermal aging
• Inductance Range from 0.2µH to 47.0µH
• Current Range from 3.65 amps to 95.0 amps
• Frequency Range 1kHz to 500kHz
Applications
• Next generation processors
• High current DC-DC converters
• VRM, multi-phase buck regulator
• PC, workstations, routers, servers
Environmental Data
• Storage temperature range: -40°C to +155°C
• Operating temperature range: -40°C to +155°C
(range is application specific)
Description
• Solder reflow temperature: +260°C max for 10 seconds maximum
• 155°C maximum total operating temperature
• Surface mount inductors designed for higher speed switch
mode applications requiring lower inductance, low voltage and
high current
Packaging
• Supplied in tape and reel packaging, 450 parts per reel
(1)
(2)
rms
(3)
(4)
(5)
Part
Rated
Inductance
µH
OCL
I
I
I
sat
DCR (mΩ)
max. @
20°C
0.50
Volts
sat
Number
Nominal
+/-15% µH
0.218
0.544
1.04
Amps
(Typ.)
46.7
33.7
23.7
21.0
17.2
14.3
13.0
10.3
8.50
6.30
4.42
3.65
Amps
Amps
30% rolloff
95
µSec
(VµS)
2.87
4.78
6.70
8.46
10.4
12.4
14.4
18.1
22.0
31.5
37.3
44.8
20% rolloff
65
HC9-R20-R
HC9-R47-R
HC9-1R0-R
HC9-1R5-R
HC9-2R2-R
HC9-3R3-R
HC9-4R3-R
HC9-6R8-R
HC9-100-R
HC9-220-R
HC9-330-R
HC9-470-R
0.20
0.47
1.0
1.5
2.2
3.3
4.3
6.8
10.0
22.0
33.0
47.0
40
28
22
18
57
41
32
26
0.88
1.87
2.27
3.37
4.87
5.90
9.40
14.0
1.70
2.53
3.52
4.67
7.45
10.9
22.4
34.5
15
22
13.2
11.4
8.6
6.0
4.8
19.1
15.1
12.5
8.7
7.0
5.7
25.7
48.8
72.3
49.2
3.9
1) Test Parameters: 100kHz, 1.0V
rms
Part number definition:
2) I
rms
amps for approximately ∆T of 40°C without core loss.
First 3 characters = Product code and size.
Derating is necessary for AC currents. Pad layout, trace thickness and width, airflow,
and proximity of other heat generating components will affect the temperature rise. It is
recommended that the temperature of the part not exceed 155°C under worst case
conditions verified in the end application.
3) Peak current for approximately 20% rolloff @20°C
4) Peak current for approximately 30% rolloff @20°C
Last 3 characters = Inductance in µH. R = decimal point.
If no R is present third character = # of zeros.
-R suffix = RoHS compliant
5) Applied Volt-Time product (V-µS) across the inductor. This value represents the applied V-µS at
operating frequency necessary to generate additional core loss which contributes to the 40°C
temperature rise. De-rating of the I
is required to prevent excessive temperature rise. The
rms
100% VµS rating is equivalent to a ripple current I of 20% of I (30% rolloff option).
p-p sat
1207 BU-SB07346
Page 1 of 3
Data Sheet 4312