HAE75W
MECHANICAL DRAWING
W, HAE75-48S
HAE75-24S
W
PIN CONNECTION
PIN
1
DEFINE
DIAMETER
0.04 Inch
0.04 Inch
0.04 Inch
0.04 Inch
0.08 Inch
0.04 Inch
0.04 Inch
0.04 Inch
0.08 Inch
-Vin
Case
Ctrl
2
3
4
+Vin
5
-Vout
-Sense
Trim
6
7
1. All dimensions in inch (mm)
2. Tolerance :x.xx 0.02 (x.x 0.5)
x.xxx 0.01 (x.xx 0.25)
8
+Sense
+Vout
9
3. Pin pitch tolerance 0.01 (0.25)
4. Pin dimension tolerance 0.004(0.1)
5. Mounting screws should always be used.
6. The screw locked torque:
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using the
method shown below.
MAX 5.0kgf-cm(0.49N-m)
HAE75-110S
W
V
(
100 + ∆ %
)
(
100 + 2∆ %
)
OUT
R
R
=
=
−
kΩ
U
D
1.225 ∆ %
∆ %
1. All dimensions in inch (mm)
2. Tolerance :x.xx 0.02 (x.x 0.5)
x.xxx 0.01 (x.xx 0.25)
3. Pin pitch tolerance 0.01 (0.25)
4. Pin dimension tolerance 0.004(0.1)
5. Mounting screws should always be used.
6. The screw locked torque:
100
− 2 k Ω
∆ %
MAX 3.5kgf-cm(0.34N-m)
HEAT-SINK TYPE OPTIONS
Vertical Fin Orientation, Suffix:-HS, -HS2
Horizontal Fin Orientation, Suffix:-HS1, -HS3
HS: Height H=0.45” vertical fin,
7G-0021A-F
HS1: Height H=0.24” horizontal fin,
7G-0022A-F
HS2: Height H=0.24” vertical fin,
7G-0023A-F
HS3: Height H=0.45” horizontal fin,
7G-0024A-F
1. All dimensions in inch (mm)
2. Tolerance :x.xx 0.02 (x.x 0.5)
x.xxx 0.01 (x.xx 0.25)
TERMINAL BLOCK TYPE OPTION
Wall mounted with EMC Filter, Suffix: -TF1
)
Wall mounted, Suffix: -T
Wall mounted with EMC Filter, Suffix: -TF
(Can be connected to PE
Terminal block type
Weight
-T
-TF
-TF1
200g (7.05oz)
280g (9.88oz)
287g (10.12oz)
Dimensions
3.35 x 2.40 x 1.10 inch (85.0 x 61.0 x 28 0mm) 3.35 x 2.40 x 1.47 inch (85.0 x 61.0 x 37.3 mm) 3.35 x 2.40 x 1.53 inch (85.0 x 61.0 x 38.8 mm)
2.126 x 3.071 inch (54.00 x 78.00 mm), 4- 0.17 inch ( 4.3mm)
Through hole (W×L)
For more detail information, please contact with P-DUKE.