HA-2400, HA-2404,
HA-2405
40MHz, PRAM Four Channel
Programmable Amplifiers
November 1996
Features
Description
• Programmability
THA-2400/04/05 comprise
a
series of four-channel
programmable amplifiers providing a level of versatility
unsurpassed by any other monolithic operational amplifier.
Versatility is achieved by employing four input amplifier
channels, any one (or none) of which may be electronically
selected and connected to a single output stage through
DTL/TTL compatible address inputs. The device formed by
the output and the selected pair of inputs is an op amp which
delivers excellent slew rate, gain bandwidth and power
bandwidth performance. Other advantageous features for
these dielectrically isolated amplifiers include high voltage
gain and input impedance coupled with low input offset
voltage and offset current. External compensation is not
required on this device at closed loop gains greater than 10.
• High Rate Slew. . . . . . . . . . . . . . . . . . . . . . . . . . . 30V/µs
• Wide Gain Bandwidth . . . . . . . . . . . . . . . . . . . . . 40MHz
• High Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150kV/V
• Low Offset Current . . . . . . . . . . . . . . . . . . . . . . . . . .5nA
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . . 30MΩ
• Single Capacitor Compensation
• DTL/TTL Compatible Inputs
Applications
• Thousands of Applications; Program
- Signal Selection/Multiplexing
- Operational Amplifier Gain
- Oscillator Frequency
Each channel of the HA-2400/04/05 can be controlled and
operated with suitable feedback networks in any of the
standard op amp configurations. This specialization makes
these amplifiers excellent components for multiplexing signal
selection and mathematical function designs. With 30V/µs
slew rate, 40MHz gain bandwidth and 30MΩ input
impedance these devices are ideal building blocks for signal
generators, active filters and data acquisition designs.
Programmability, coupled with 4mV typical offset voltage and
5nA offset current, makes these amplifiers outstanding
components for signal conditioning circuits.
- Filter Characteristics
- Add-Subtract Functions
- Integrator Characteristics
- Comparator Levels
Ordering Information
TEMP.
PKG.
NO.
o
PART NUMBER RANGE ( C)
PACKAGE
HA1-2400-2
HA1-2404-4
HA1-2405-5
HA3-2405-5
-55 to 125 16 Ld CERDIP
F16.3
During Disable Mode V
OUT
impedance during Disable, see HA2444.
goes to V-. For high output
-25 to 85
0 to 75
0 to 75
16 Ld CERDIP
16 Ld CERDIP
16 Ld PDIP
F16.3
F16.3
E16.3
For further design ideas, see Application Note AN514.
Pinout
TRUTH TABLE
HA-2400/04 (CERDIP)
HA-2405 (CERDIP, PDIP)
TOP VIEW)
D1
L
D0
L
EN
H
SELECTED CHANNEL
D1
L
1
2
3
4
L
H
L
H
L
+
D0
D1
16
1
2
3
4
5
6
7
8
+IN3
-IN3
+IN4
-IN4
-IN1
+IN1
-IN2
+IN2
DECODE
3
3
H
H
X
H
H
H
X
CONTROL
15
-
H
X
H
+
14 ENABLE
13 GND
L
None, V goes to V-
OUT
4
1
-
-
COMP
12
V+
11
+
-
10 OUT
2
9
V-
+
OUTPUT AMP
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
File Number 2891.2
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
3-161