5秒后页面跳转
HA.4710C2AM PDF预览

HA.4710C2AM

更新时间: 2023-06-15 00:00:00
品牌 Logo 应用领域
威世 - VISHAY /
页数 文件大小 规格书
9页 375K
描述
CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 0.47 uF, THROUGH HOLE MOUNT, AXIAL LEADED

HA.4710C2AM 数据手册

 浏览型号HA.4710C2AM的Datasheet PDF文件第2页浏览型号HA.4710C2AM的Datasheet PDF文件第3页浏览型号HA.4710C2AM的Datasheet PDF文件第4页浏览型号HA.4710C2AM的Datasheet PDF文件第5页浏览型号HA.4710C2AM的Datasheet PDF文件第6页浏览型号HA.4710C2AM的Datasheet PDF文件第7页 
HA  
www.vishay.com  
Vishay Sprague  
Subminiature, Leaded Solid Tantalum Capacitors  
Polar or Non-Polar  
FEATURES  
• Subminiature package size and light weight  
• Cylindrical case with axial or radial leads  
• 2 VDC to 50 VDC  
• 0.001 μF to 68 μF  
• Operating temperature range: - 55 °C to + 125 °C  
• High stability and reliability  
• Tested in accordance with MIL-PRF-49137  
• Unique and comprehensive custom design capability  
ELECTRICAL CHARACTERISTICS  
Operating Temperature Range: - 55 °C to + 125 °C  
APPLICATIONS  
• Hearing aids  
Capacitance: Measured at 120 Hz and 25 °C with a  
maximum of 2.2 VDC bias and 1.0 VRMS signal.  
• Portable communications  
• Space/avionics  
Capacitance Tolerance: Standard tolerance is 20 ꢀ for  
ratings 0.1 μF and above, and + 40 ꢀ, - 20 ꢀ for ratings  
below 0.1 μF. Special tolerances are also available.  
• Laptop computers  
Dissipation Factor: When measured simultaneously with  
capacitance, DF shall not exceed the value shown in the  
ratings tables.  
MECHANICAL SPECIFICATIONS  
Solder coated nickel leads (type N32 per MIL-STD-1276) are  
standard on all case sizes.  
DC Leakage Current (DCL Max.):  
When measured with DC voltage applied through a 1000  
resistor for 5 min, DC leakage (μA) shall not exceed:  
Leads are weldable and/or solderable.  
Special leads are available on request (e.g. bare nickle, gold  
plated nickle or ribbon leads).  
At 25 °C: Leakage current shall not exceed the values listed  
in the Standard Ratings tables.  
Lead length is 1 1/2" [38.1 mm] minimum on non-polar parts.  
At 85 °C: Leakage current shall not exceed 10 times the  
values listed in the Standard Ratings tables.  
On polar parts the negative lead is 1 1/4" [31.8 mm]  
minimum and the positive lead is 1 1/2" [38.1 mm] minimum.  
At 125 °C and 66 % of rated voltage: Leakage current shall  
not exceed 15 times the values listed in the Standard  
Ratings tables.  
Operating Voltage: Full working voltage up to 85 °C. From  
85 °C to 125 °C working voltage derates linearly to 66 ꢀ of  
the 85 °C working voltage.  
ORDERING INFORMATION  
HA  
1.0  
35  
C7  
A (1)  
M
MODEL  
CAPACITANCE  
IN μF  
DC VOLTAGE RATING  
AT + 85 °C  
CASE CODE  
LEAD CONFIGURATION  
CAPACITANCE TOLERANCE  
C = Polar  
N = Non-polar  
A = Axial  
R = Radial  
E = + 40 ꢀ, - 20 ꢀ  
M = 20 ꢀ  
K = 10 ꢀ  
J = 5 ꢀ  
Example of Part Number Code: HA1.0-35C7AM  
Note  
(1)  
To complete part number in rating tables, add A or R.  
Change suffix if special capacitance tolerance is required.  
Revision: 05-Dec-07  
Document Number: 43003  
1
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  

与HA.4710C2AM相关器件

型号 品牌 描述 获取价格 数据表
HA.4735C5AK VISHAY CAPACITOR, TANTALUM, SOLID, POLARIZED, 35 V, 0.47 uF, THROUGH HOLE MOUNT, AXIAL LEADED

获取价格

HA.474N1AJ VISHAY CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 4 V, 0.47 uF, THROUGH HOLE MOUNT, AXIAL LEADED

获取价格

HA.474N1AK VISHAY CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 4 V, 0.47 uF, THROUGH HOLE MOUNT, AXIAL LEADED

获取价格

HA.474N1AM VISHAY CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 4 V, 0.47 uF, THROUGH HOLE MOUNT, AXIAL LEADED

获取价格

HA.47-4N1AM VISHAY CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 4 V, 0.47 uF, THROUGH HOLE MOUNT, AXIAL LEADED

获取价格

HA.474N1RM VISHAY CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 4 V, 0.47 uF, THROUGH HOLE MOUNT, RADIAL LEADED

获取价格