ESR Chart
Frequency Range
ESR (Ohms)
Mode / Cut
Fund / AT
Fund / AT
Fund / AT
Fund / AT
3rd OT/ AT
8.000MHZ to 10.999MHZ
11.000MHZ to 11.999MHZ
12.000MHZ to 15.999MHZ
16.000MHZ to 39.999MHZ
40.000MHZ to100.000MHZ
100 max
80 max
60 max
40 max
70 max
Part Number Guide
Frequency
H
6mm X 3.5mm x 1.2mm
4 Pads
Mode of Operation
1 = Fundamental
3 = 3rd Overtone
Temperature
Tolerance/Stability*
A = ±50 ppm / ±100 ppm
B = ±30 ppm / ±50 ppm
C = ±15 ppm / ±30 ppm
D = ±10 ppm / ±15 ppm
E = ±50 ppm / ±50 ppm
N = ±10 ppm / ±10 ppm
Load Capacitance
S = Series
20 = 20pF (Standard)
Operating Temperature
A = 0°C to +70°C
B = -20°C to +70°C
C = -40°C to +85°C **
Value Added Options
Blank = No Added Options
T = Tape and Reel
XX = XXpF (8pF to 50pF)
* Please consult with MMD sales department for any other parameters or options.
** Not all Frequency Tolerance/Stability options available at this temperature range.
Mechanical Details
Tape & Reel
PITCH
NOTES: UNLESS OTHERWISE SPECIFIED
/ Specifications
1. Applicable Standards
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, mm through 200mm Embossed Carrier Taping and
8
8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters.
3. Tolerances are ±0.10 [.004] mm unless otherwise specified.
4. Do not scale drawing.
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
TAPE WIDTH
REEL DIA
8.00 [.315]
16.00 [.630]
180[7 IN]
1000
PITCH
TAPE WIDTH
REEL DIA
QTY PER REEL
Q1
PIN
1 ORIENT.
DIRECTION OF FEED
MMD MONITOR/QUARTZEK – An ILSI Company,
5458 Louie Lane, Reno, NV 89511
Phone: (775) 851-8880, www.mmdcomp.com
Revision:
07/10/13 J
Pg 2
Specifications are subject to change without notice.