GR6004
Constant Current Switching Converter for High Brightness
LED Driving
Features
General Description
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Wide input voltage range from 4.5V to 26V
The GR6004 is a high efficiency constant current
driver for high brightness LED. The 0.2V reference
voltage minimized the power dissipation of the LED
current set resistor that located between FB to GND.
This low reference voltage increases the efficiency
apparently with the one LED load condition. Beside,
Maximum efficiency over 95%
1.5A output current for HB LED
0.2V reference voltage for high efficiency
100mΩ integrated power PMOSFET
Built-in soft start
750KHz fixed switching frequency
Over-current protection
a
100mΩ integrated power PMOSFET only
dissipated a little power in the conduction period. In
order to meet the mini size applications, the small
size inductor and output capacitor usually used
under the 750KHz operating. There are over-
temperature protection (OTP) and over-current
protection (OCP) in GR6004. These protection
functions could prevent GR6004 from damage in
abnormal situations.
Over-temperature protection
SOP-8/SOP-8-EP package
Lead free and green devices available
Application
ꢀ
ꢀ
ꢀ
MR16 LED lamp
Luminance applications with DC input voltage
LED flashlight
Ordering and Marking Information
SOP-8/SOP-8-EP
Grenergy OPTO Inc. reserves the right to make changes to improve reliability or manufacture ability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
2010.04 Ver. 1.01 Copyright Grenergy OPTO, Inc. www.grenergy-ic.com
1