5秒后页面跳转
FXL2SD106BQX_11 PDF预览

FXL2SD106BQX_11

更新时间: 2024-02-23 17:16:03
品牌 Logo 应用领域
飞兆/仙童 - FAIRCHILD 转换器
页数 文件大小 规格书
11页 294K
描述
Low-Voltage Dual-Supply 6-Bit Voltage Translator with Auto-Direction Sensing

FXL2SD106BQX_11 数据手册

 浏览型号FXL2SD106BQX_11的Datasheet PDF文件第2页浏览型号FXL2SD106BQX_11的Datasheet PDF文件第3页浏览型号FXL2SD106BQX_11的Datasheet PDF文件第4页浏览型号FXL2SD106BQX_11的Datasheet PDF文件第5页浏览型号FXL2SD106BQX_11的Datasheet PDF文件第6页浏览型号FXL2SD106BQX_11的Datasheet PDF文件第7页 
June 2011  
FXL2SD106  
Low-Voltage Dual-Supply 6-Bit Voltage  
Translator with Auto-Direction Sensing  
Features  
General Description  
– Bi-Directional Interface between Two Levels: 1.1V  
and 3.6V  
The FXL2SD106 is a configurable dual-voltage-supply  
translator designed for both uni-directional and bi-  
directional voltage translation between two logic levels.  
The device allows translation between voltages as high  
as 3.6V to as low as 1.1V. The A port tracks the VCCA  
level and the B port tracks the VCCB level. This allows for  
bi-directional voltage translation over a variety of voltage  
levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V.  
– Fully Configurable: Inputs and Outputs Track VCC  
Level  
– Non-Preferential Power-up; Either VCC May Be  
Powered-up First  
– Outputs Remain in 3-State until Active VCC Level is  
Reached  
The device remains in 3-state until both VCC reach active  
levels, allowing either VCC to be powered-up first. Inter-  
nal power-down control circuits place the device in 3-  
state if either VCC is removed.  
– Outputs Switch to 3-State if Either VCC is at GND  
– Power-Off Protection  
– Bus hold on Data Inputs Eliminates Need for Pull-  
up Resistors (Do NOT Use Resistors on the A or B  
Ports)  
The OE input, when low, disables both A and B ports by  
placing them in a 3-state condition. The FXL2SD106 is  
– OE and CLK IN are Referenced to VCCA Voltage  
– Packaged in 16-Terminal DQFN (2.5mm x 3.5mm)  
– Direction Control Not Needed  
designed so that OE and CLK IN are supplied by VCCA  
.
The device senses an input signal on A or B port auto-  
matically. The input signal is transferred to the other port.  
– 80 Mbps Throughput Translating between 1.8V  
and 2.5V  
The FXL2SD106 is not designed for SD card applica-  
tions. The internal bus hold circuitry conflicts with pull-up  
resistors. SD cards have internal pull-up resistors on the  
CD/DAT3 pins.  
– ESD Protection Exceeds:  
– 12kV HBM (B port I/O to GND)  
(per JESD22-A114 & Mil Std 883e 3015.7)  
– 8kV HBM (A port I/O to GND)  
(per JESD22-A114 & Mil Std 883e 3015.7)  
– 1kV CDM (per ESD STM 5.3)  
Ordering Information  
Order Number  
Package Number  
Package Description  
16-Terminal Depopulated Quad Very-Thin Flat Pack,  
No Leads (DQFN), JEDEC MO-241, 2.5mm x 3.5mm  
FXL2SD106BQX  
MLP16E  
© 2008 Fairchild Semiconductor Corporation  
FXL2SD106 • Rev. 1.8.1  
www.fairchildsemi.com  

与FXL2SD106BQX_11相关器件

型号 品牌 获取价格 描述 数据表
FXL2T245 FAIRCHILD

获取价格

Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Sig
FXL2T245L10X FAIRCHILD

获取价格

Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Sig
FXL2T245L10X ONSEMI

获取价格

低电压双电源 2 位信号转换器,带可配置电压供应和信号电平,以及 3 态输出
FXL2T245L10X_NL FAIRCHILD

获取价格

暂无描述
FXL2TD245 FAIRCHILD

获取价格

Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Sig
FXL2TD245L10X FAIRCHILD

获取价格

Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Sig
FXL2TD245L10X ONSEMI

获取价格

低电压双电源 2 位信号转换器,带可配置电压供应和信号电平,以及 3 态输出和独立方向控制
FXL3SD206 FAIRCHILD

获取价格

Level Shifting Voltage Translator Two-Port SDIO MUX/DEMUX with Three Configurable Power Su
FXL3SD206UMX FAIRCHILD

获取价格

Level Shifting Voltage Translator Two-Port SDIO MUX/DEMUX with Three Configurable Power Su
FXL4245 FAIRCHILD

获取价格

Low Voltage Dual Supply 8-Bit Signal Translator with Configurable Voltage Supplies and Sig