Technical Data
Technische Daten
Mechanical Data
Mechanische Daten
Mechanical Data
Mechanische Daten
Mating force per signal contact
dꢀ3,4 N
tꢀ0,2 N
Steckkraft pro Signalkontakt
Unmating force per signal contact
Ziehkraft pro Signalkontakt
max. torque *
40 Ncm (0,295 ft.lb.)
max. Anzugsmoment *
40 Ncm
* Not for locking screws
* Nicht für Verriegelungsschrauben
Electrical Data
Elektrische Daten
Electrical Data
Elektrische Daten
Current rating at room temperature
Maximale Stromstärke bei Raumtemperatur
Test voltage between 2 contacts / shell and contact
Prüfspannung zwischen 2 Kontakten bzw. Kontakt und Gehäuse
Meets transition resistance requirements per contact pair in line with DIN 41652:
Erfüllt Übergangswiderstand pro Kontaktpaar nach DIN 41652 für:
- Straight contacts / gerade Kontakte
- Right angled contacts / abgewinkelte Kontakte
- Right angled contacts - 50 way / abgewinkelte Kontakte bei 50 Polen
Insulation resistance between contacts
5 A
1200 V / 1 min.
d 10 m:
d 25 m:
d 35 m:
t 5000 M
:
Isolationswiderstand Kontakt / Kontakt
Volume resistivity
Spezifischer Durchgangswiderstand
1016 : cm
Dielectric strength
Spezifische Durchschlagsfestigkeit
50 kV / mm
Materials and Platings
Materialien und Oberflächen
Materials and Platings
Materialien und Oberflächen
Shell
Steel
Stahl
FH
Gehäuse
Type / Type
Insulator
F
FM
Polyester, glass filled
(UL94V-0), white
Polyester, glasfaserverstärkt
(UL94V-0), weiß
Polyester, heat resistant,
glass filled (UL94V-0), natural
Polyester,
hochtemperaturbeständig,
glasfaserverstärkt (UL94V-0), natur
Polyester, glass filled (UL94V-0),
green
Polyester, glasfaserverstärkt
(UL94V-0), grün
Isolierkörper
Relative temperature index according
to UL 746 B
rel. Temperaturindex nach
UL 746 B
125 °C (257 °F)
150 °C (302 °F)
130 °C (266 °F)
Heat deflection temperature limit
according to DIN 53461 HDT/A
Formbeständigkeitstemperatur nach
DIN 53461 HDT/A
Sub temperature limit
Untere Grenztemperatur
Shell plating (standard)
200 °C (392 °F)
-55 °C (-67 °F)
255 °C (491 °F)
210 °C (410 °F)
-55 °C (-67 °F)
-55 °C (-67 °F)
Tin plated over nickel
Yellow chromate over zinc plating
Not RoHS compliant
Gehäuseoberfläche (Standard)
verzinnt über Nickel
verzinkt und gelb chromatiert
nicht RoHS konform
Shell (standard)
Gehäuse (Standard)
Pin connector shell with dimples
Stiftsteckverbindergehäuse mit Kontaktnoppen
Pin connector shell without dimples
Stiftsteckverbindergehäuse ohne
Kontaktnoppen
Tin plated over nickel, pin connector
shell with dimples
Shell (K120)
verzinnt über Nickel,
Gehäuse (K120)
Stiftsteckverbindergehäuse mit
Kontaktnoppen
Tin plated over nickel, pin connector
shell without dimples
Shell (K121)
verzinnt über Nickel,
Gehäuse (K121)
Stiftsteckverbindergehäuse ohne
Kontaktnoppen
Contact material
Kontaktmaterial
Copper alloy
Kupfer-Legierung
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
10
DS 10/2007