诚信 专注 创新 卓越
FAITH FOCUS FUTURE FIRST
测试方法
项目 Project
明细 Detail
The test conditions
小于等于 10%初始值
温度循环:-40℃±2℃→常温→+
85℃±2℃→常温
容量△C
Less than or equal to10% of the initial value
高低温循环特性Temperature
Temperature cycle:-40℃±2℃→
normal temperature→+85℃±2℃→
normal temperature
cycle
外观
无机械损伤或漏液
appearance
No mechanical damage or leakage
循环次数 Cycles:5
小于等于 10%初始值
容量△C
Less than or equal to10% of the initial value
小于等于初始值 2 倍
低温存储特性
施加电压 Applied voltage:0V
温度 Temperature:-40℃±2℃
时间 Time:96h
Low temperature storage ESR
Less than or equal to 2 times the initial value
无漏液或机械损伤
characteristics
外观
appearance
No mechanical damage or leakage
小于等于 10%初始值
容量△C
Less than or equal to10% of the initial value
小于等于初始值 2 倍
高温存储特性
施加电压 Applied voltage:0V
温度 Temperature:+85℃±2℃
时间 Time:96h
High temperature storage ESR
Less than or equal to 2 times the initial value
无漏液或机械损伤
characteristics
外观
appearance
No mechanical damage or leakage
充电过程:常温,无负载,额定电压
充电 8h
Charging process: normal temperature,
no load, rated voltage charge 8h
自放电特性
自放电截止电压大于等于额定电压的 80%
Self discharge characteristics
The self-discharge cut-off voltage is greater than or 放置过程:温度小于等于 25℃,相
equal to 80% of the rated voltage
对湿度小于 60%RH,开路放置 24h
Placement process: temperature less
than or equal to 25 ℃ , relative
humidity less than 60% RH, open 24 h
引出端强度
引出端无损坏
DL/T 1652-2016
Lead strength
No damage to the outlet
超过 3/4 端子表面被锡层覆盖
可焊性
More than 3/4 of the terminal surface is covered by a DL/T 1652-2016
Solder ability
tin layer
➢ 标准产品外形尺寸图 shape of standard product
A Type
B
Type
实际尺寸及公差以参数表为准。
The actual size and tolerance shall be subject to the parameter table.
4