Isolated CAN Transceiver with Integrated
High Voltage, Bus-Side, Linear Regulator
ADM3052
FEATURES
GENERAL DESCRIPTION
5 kV rms isolated CAN transceiver
Integrated V+ linear regulator
Bus side powered by V+ and V−
11 V to 25 V operation on V+
The ADM3052 is an isolated controller area network (CAN)
physical layer transceiver with a V+ integrated linear regulator.
The ADM3052 complies with the ISO 11898 standard.
The device employs Analog Devices, Inc., iCoupler® technology
to combine a 3-channel isolator, a CAN transceiver, and a linear
regulator into a single package. The power is isolated between a
single 3.3 V or 5 V supply on VDD1, the logic side, and a single
24 V supply provided on V+, the bus side.
5 V or 3.3 V operation on VDD1
Complies with ISO 11898 standard
High speed data rates up to 1 Mbps
Short-circuit protection on bus pins
Integrated bus miswire protection
Unpowered nodes do not disturb the bus
110 or more nodes on the bus
Thermal shutdown protection
The ADM3052 creates an isolated interface between the CAN
protocol controller and the physical layer bus. It is capable of
running at data rates up to 1 Mbps.
High common-mode transient immunity: >25 kV/μs
Safety and regulatory approvals
UL recognition (pending)
5000 VRMS for 1 minute per UL 1577
VDE Certificates of Conformity (pending)
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
The device has integrated miswire protection on the bus pins,
V+, V−, CANH, and CANL.
The device has current-limiting and thermal shutdown features
to protect against output short circuits and situations where the
bus may be shorted to ground or power terminals. The part
is fully specified over the industrial temperature range and is
available in a 16-lead, wide-body SOIC package.
VIORM = 846 V peak
Industrial operating temperature range: −40°C to +85°C
Wide body, 16-lead SOIC package
APPLICATIONS
CAN data buses
Industrial field networks
DeviceNet applications
FUNCTIONAL BLOCK DIAGRAM
V
C
INT
DD1
ISOLATION
BARRIER
LINEAR
V
V
+R
REGULATOR
V
DD2
BUS
+SENSE
DECODE
ENCODE
DECODE
ENCODE
DECODE
ENCODE
V
V
+
+SENSE
V
DD2
PROTECTION
DRIVER
TxD
RxD
TxD
RxD
CANH
CANL
RECEIVER
V
REF
REFERENCE
VOLTAGE
V
V
REF
–
GND
2
GND
2
ADM3052
DIGITAL ISOLATION
GND
CAN TRANSCEIVER
1
LOGIC SIDE
BUS SIDE
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2011 Analog Devices, Inc. All rights reserved.