EL1517A
®
Data Sheet
August 8, 2006
FN6139.2
xDSL Differential Line Driver
Features
The EL1517A is a dual operational amplifier designed for
VDSL and ADSL line driving in DMT based solutions. This
device features a high drive capability of 250mA while
consuming only 7mA of supply current per amplifier and
operating from a single 5V to 12V supply. This driver
achieves a typical distortion of -80dBc, at 150kHz into a 25Ω
load. The EL1517A is available in a 10 Ld HMSOP package
and is specified for operation over the full -40°C to +85°C
temperature range. The device has control pins C and C
• Drives up to 250mA from a +12V supply
• 18V
• 20V
differential output drive into 50Ω
P-P
differential output drive into 100Ω
P-P
• -80dBc typical driver output distortion at full output at
150kHz
• -75dBc typical driver output distortion at 3.75MHz
• -60dBc typical driver output distortion at 8MHz
• -50dBc typical driver output distortion at 16MHz
• Low quiescent current of 7mA per amplifier
• 200MHz bandwidth
0
1
for controlling the bias and enable/disable of the outputs.
These controls allow for lowering the power to fit the
performance/power ratio for the application.
The EL1517A is ideal for ADSL, SDSL, HDSL2 and VDSL
line driving applications. The “A” suffix is used only for
package leadframe distinction between EL1517. All
performance graphs in this datasheet were generated for
EL1517IS and EL1517IL. There is no significant electrical
difference between EL1517AIYE and the performance
curves for EL1517IL.
• Use for single supply applications
• Pb-free available (RoHS compliant)
Applications
• VDSL line drivers
• ADSL full rate CPE line driving
• G.SHDSL, HDSL2 line drivers
• HomePlug networking drivers
The EL1517A can only be used for single supply operation.
Use EL1517IL or EL1517IS for dual supply applications.
Ordering Information
TAPE
&
Pinout
PART
PKG.
EL1517A
(10 LD HMSOP)
TOP VIEW
PART NUMBER MARKING REEL
PACKAGE
DWG. #
EL1517AIYE
BBJAA
BBJAA
BBJAA
BBKAA
-
10 Ld HMSOP MDP0050
10 Ld HMSOP MDP0050
EL1517AIYE-T7
EL1517AIYE-T13
7”
VS+
NC
1
2
3
4
5
10 OUTB
13” 10 Ld HMSOP MDP0050
9
8
7
6
INB-
INB+
C1
EL1517AIYEZ
(Note)
-
10 Ld HMSOP MDP0050
(Pb-Free)
OUTA
INA-
INA+
GND*
EL1517AIYEZ-T7 BBKAA
(Note)
7”
10 Ld HMSOP MDP0050
(Pb-Free)
C0
EL1517AIYEZ-T13 BBKAA
(Note)
13” 10 Ld HMSOP MDP0050
(Pb-Free)
THERMAL PAD MUST BE CONNECTED TO GROUND.
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both
SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020C.
PAD IS CONNECTED INTERNALLY TO V - AND THUS EL1517A CAN
S
ONLY BE USED IN SINGLE SUPPLY APPLICATIONS.
Get Full Datasheet
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2005-2006. All Rights Reserved.
1
All other trademarks mentioned are the property of their respective owners.
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
