MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Long life, High ripple, 135℃
New!
GPDSeries
Endurance with ripple current : 2,000 to 3,000 hours at 125 to 135
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
Guaranteed short time at 150
Downsized and high-ripple current version of GPA series
For automobile modules and other high temperature applications
・
・
・
・
・
・
℃
Downsized
Higher ripple current
GPD
GPA
P186
℃
℃
RoHS Compliant
SPECIFICATIONS
◆
Items
Characteristics
Category
Temperature Range
-
40 to +135℃
Rated Voltage Range 25 to 100Vdc
(at 20℃, 120Hz)
Capacitance Tolerance
Leakage Current
±20% (M)
I=0.03CV or 4 A, whichever is greater.
µ
(at 20℃, 1 minute)
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
25V
0.14
35V
0.12
50V
0.10
63V
0.10
80V
0.08
100V
0.08
Dissipation Factor
δ
(tan )
tanδ(Max.)
(at 20℃, 120Hz)
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
Rated voltage (Vdc)
25V
2
35V
2
50V
2
63V
2
80V
2
100V
Low Temperature
Characteristics
(Max. Impedance Ratio)
Z(-
25℃)/Z(+20℃)
40℃)/Z(+20℃)
2
4
(at 120Hz)
Z(-
4
4
4
4
4
Endurance 1
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple
current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃ or 135℃.
125℃ꢀ3,000hours
Time
135℃ꢀ25 to 50Vdc:3,000hours
63 to 100Vdc:2,000hours
≦±30% of the initial value
≦300% of the initial specified value
≦The initial specified value
Capacitance change
D.F. (tanδ)
Leakage current
Endurance 2
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the test condition that the rated voltage is
applied for 100 hours at 150℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated
voltage) for the specified period of time at 125℃ or 135℃.
125℃ꢀ2,500hours
Time
135℃ꢀ25 to 50Vdc:2,500hours
63 to 100Vdc:1,500hours
≦±30% of the initial value
≦300% of the initial specified value
≦The initial specified value
Capacitance change
D.F. (tanδ)
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without
Shelf Life
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
D.F. (tanδ)
Leakage current
≦±30% of the initial value
≦300% of the initial specified value
≦The initial specified value
DIMENSIONS [mm]
◆
●
Terminal Code : E
Coated Case
φD 12.5ꢀꢀ14.5ꢀꢀ16 ꢀꢀ18
φd
F
0.6ꢀꢀ0.8 ꢀꢀ0.8
5.0 7.5 7.5
0.8
7.5
φD'
L'
φD+0.5max.
L+1.5max.
15min.
4min.
L'
Vent
Gas escape end seal
PART NUMBERING SYSTEM
◆
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
1
E G P D A A A E A A A A A M A A A H
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 470µF:471, 1,000µF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 25V:250, 50V:500)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001N
193