EC49017
Standalone Linear Lithium Battery Charger
Features
General Description
Programmable Charge Current Up to 800mA
EC49017 is
a complete constant-current &
No MOSFET, Sense Resistor or Blocking Diode
Required
constant voltage linear charger for single cell lithium-ion
and Lithium-Polymer batteries. Its SOT23 package and
low external component count make EC49017 ideally
suited for portable applications. Furthermore, the
EC49017 is specifically designed to work within USB
power specification. At the same time, EC49017 can
also be used in the standalone lithium-ion and
Lithium-polymer battery chargers.
Constant-Current/Constant-Voltage Operation with
Thermal Protection to Maximize Charge Rate
without Risk of Overheating
Charges Single Cell Li-ion Batteries Directly from
USB Port
Preset 4.22V Charge Voltage with ±1% Accuracy
20μ A Supply Current in Shutdown
2.9V Trickle Charge Threshold
No external sense resistor is needed, and no
blocking diode is required due to the internal MOSFET
architecture. Thermal feedback regulates the charge
current to limit the die temperature during high power
operation or high ambient temperature. The charge
voltage is fixed at 4.22V, and the charge current can be
programmed externally with a single resistor.The
EC49017 automatically terminates the charge cycle
when the charge current drops to 1/10th the
programmed value after the final float voltage is
reached.
Soft-Start Limits Inrush Current
Available in 6-Lead SOT23 and SOP-8(Exposed
PAD) Packages
RoHS Compliant and 100% Lead Pb free
Applications
Cellular Telephones, PDA, MP3 Players
When the input supply (wall adapter or USB
supply) is removed, the EC49017 automatically enters a
low current stage, dropping the battery drain current to
Charging Docks and Cradles
Bluetooth Applications
less than 2uA.
The EC49017 can be put into
shutdown mode, reducing the supply current to 20uA.
Other features include charge current monitor,
undervoltage lockout, automatic recharge and a status
pin to indicate charge termination and the presence of
an input voltage. EC49017 is intentionally designed to
have slightly negative Tempco. This provides extra
protection to Lithium battery during charging.
Application Diagram
Pin Configuration
E-CMOS Corp. (www.ecmos.com.tw)
Page 1 of 11
3H20N Rev. P001