data sheet
Induktive Sensoren
Détecteurs inductifs
Inductive sensors
DW-A -519-M18-3 0
Durchmesser
Diamètre
Schaltabstand
Portée
Einbau
Montage
Mounting
nicht-bündig
non-noyable
non-embeddable
M18
0...20mm
Diameter
Operating distance
Ausführung mit Analogausgang Appareil à sortie analogique
Device with analog output
Wichtigste Eigenschaften:
Caractéristiques principales:
Main features:
– Erfassungsbereich 0 ... 20 mm
– Betriebsspannung 15...30 VDC
– Spannungsausgang 0 ... 10 V
– Stromausgang 4 ... 20 mA
– Domaine de détection 0 à 20 mm
– Tension de service 15 ... 30 VDC
– Tension de sortie 0 à 10 V
– Sensing range 0 to 20 mm
– Supply voltage 15 ... 30 VDC
– Output voltage 0 to 10 V
– Output current 4 to 20 mA
– Courant de sortie 4 à 20 mA
– Kurzschlussschutz,Induktionsschutz, – Protections contre les courts-circuits, – Protections against short-circuits,
Verpolungsschutz eingebaut
– Nicht linearisierte Ausführung
les surtensions induites et l'inversion
de tension incorporées
induced overvoltages and voltage
reversal built-in
– Version non linéarisée
– Versions câble ou connecteur S12
– Non-linearized version
– Cable and S12 connector versions
– Anschluss über Kabel oder Stecker
S12
Technische Daten:
Caractéristiques techniques:
(selon CEI 60947-5-2)
Domaine de détection sd
Cible normalisée
Technical data:
(according to IEC 60947-5-2)
Sensing range sd
(gemäss IEC 60947-5-2)
Erfassungsbereich sd
Normmessplatte
0 ... 20 mm
60 x 60 x 1 mm
Standard target
Wiederholgenauigkeit (gemäss IEC
60947-5-2)
Reproductibilité (selon CEI 60947-5-2) Repeat accuracy (according to IEC
60947-5-2)
0,3 mm (UB = 20 ... 30 VDC,
TA = 23 oC ± 5 oC)
Wiederholgenauigkeit (TA = konstant)
Auflösung
Reproductibilité (TA = constant)
Résolution
Repeat accuracy (TA = constant)
Resolution
± 0,05 mm
≤ 5 µm
Betriebsspannungsbereich UB
Zulässige Restwelligkeit
Ausgangsspannung an A1 s = 0 mm
s = 10 mm
s = 20 mm
s > 20 mm
Laststrom am Spannungsausgang A1
Tension de service UB
Ondulation admissible
Tension de sortie à A1
Supply voltage range UB
Max. ripple content
Output voltage at A1
15 ... 30 VDC
≤ 20% UB
s = 0 mm
s = 0 mm
0 V / - 0 + 0,4 V (23 oC)
s = 10 mm + 5,2 V / ± 0,4 V (23 oC)
s = 20 mm + 10 V / ± 0,4 V (23 oC)
s > 20 mm + 10 ... + 12 V / ± 0,4 V (23 oC)
≤ 10 mA
s = 10 mm
s = 20 mm
s > 20 mm
Charge à la sortie tension A1
Courant de sortie à A2 s = 0 mm
Load at voltage output A1
Output current at A2
Ausgangsstrom an A2
s = 0 mm
s = 20 mm
s > 20 mm
s = 0 mm
4 mA / ± 0,8 mA (23 oC)
s = 20 mm
s > 20 mm
s = 20 mm 20 mA / ± 0,8 mA (23 oC)
s > 20 mm 20 ... 23 mA / ± 0,8 mA (23 oC)
Max. Last am Stromausgang A2
Leerlaufstrom
Bandbreite
Bereitschaftsverzögerung
Umgebungstemperaturbereich TA :
A1 belastet, A2 unbelastet
A1 unbelastet, A2 belastet
Temperaturdrift von sr
Kurzschlussschutz
Verpolungsschutz
Charge max. à la sortie courant A2
Courant hors-charge
Bande passante
Max. load at current output A2
No-load supply current
Bandwidth
500 Ω (UB=15 V) / 1 kΩ (UB=30 V)
≤ 12 mA
250 Hz (-3 dB bei/à/at s = 10 mm)
≤ 50 msec
Retard à la disponibilité
Plage de température ambiante TA :
A1 chargé, sans charge sur A2
sans charge sur A1, A2 chargé
Dérive en température de sr
Protectioncontreles courts-circuits
Protection contre les inversions
Chocs et vibrations
Time delay before availability
Ambient temperature range TA :
load at A1, no load at A2
no load at A1, load at A2
Temperature drift of sr
Short-circuit protection
Voltage reversal protection
Shocks and vibration
Cable length
25 ... +70oC
gemäss / selon / acc. to Fig. 2
≤ 10%
eingebaut / intégrée / built-in
eingebaut / intégrée / built-in
IEC 60947-5-2 / 7.4
300 m max.
Schocken und Schwingen
Leitungslänge
Longueur du câble
Gewicht (Kabel / Stecker)
Schutzart
EMV - Schutz:
Poids (câble / connecteur)
Indice de protection
Protection CEM:
Weight (cable / connector)
Degree of protection
EMC protection:
-390: 116/55 g; -320: 110/50 g
IP 67
IEC 60947-5-2 (7.2.3.1)
IEC 61000-4-2
CEI 60947-5-2 (7.2.3.1)
CEI 61000-4-2
IEC 60947-5-2 (7.2.3.1)
IEC 61000-4-2
5 kV
Level 2
IEC 61000-4-3
CEI 61000-4-3
IEC 61000-4-3
Level 3
IEC 61000-4-4
CEI 61000-4-4
IEC 61000-4-4
Level 2
Gehäusematerial
Matériau du boîtier
Housing material
Messing cr/laiton cr/cr-plated brass
Aktive Fläche
Anschlusskabel (andere Längen auf
Anfrage)
Face sensible
Câble de raccordement (autres
longueurs sur demande)
Sensing face
Connection cable (other lengths on
request)
PBTP
PUR 4 x 0,25mm2 / 128 x 0,05mm Ø
2 m
Anschlussschema / Schéma de raccordement / Wiring diagram
Steckerbelegung (Sicht auf Gerät)
Attribution des pins (vue sur appareil)
Pin assignment (view onto device)
S12
CONTRINEX AG Industrial Electronics
route du Pâqui 5 - P.O. Box - CH 1720 Corminboeuf - Switzerland - Tel: +41 26 460 46 46 - Fax: +41 26 460 46 40 - Internet: www.contrinex.com - E-mail: info@contrinex.com