Data Sheet
DS28E15
DeepCover Secure Authenticator with 1-Wire SHA-256 and 512-Bit User EEPROM
General Description
DeepCover™ embedded security solutions cloak sensitive
data under multiple layers of advanced physical security to
provide the most secure key storage possible.
Benefits and Features
● 512-Bit EEPROM with SHA-256 Authentication for
Reads and Writes
• Symmetric-Key-Based Bidirectional Secure
Authentication Model Based on SHA-256
• Strong Authentication with a High-Bit-Count User-
Programmable Secret and Input Challenge
• 512 Bits of User EEPROM Partitioned Into Two Pages
of 256 Bits
• User-Programmable and Irreversible EEPROM
Protection Modes Including Authentication, Write and
Read Protect, and OTP/EPROM Emulation
• Unique Factory-Programmed, 64-Bit Identification
Number
The DeepCover Secure Authenticator (DS28E15) combines
crypto-strong bidirectional secure challenge-and-response
authentication functionality with an implementation based
on the FIPS 180-3-specified Secure Hash Algorithm (SHA-
256). A 512-bit user-programmable EEPROM array provides
nonvolatile storage of application data. Additional protected
memory holds a read-protected secret for SHA-256 opera-
tions and settings for memory protection control. Each device
has its own guaranteed unique 64-bit ROM identification num-
ber (ROM ID) that is factory programmed into the chip. This
unique ROM ID is used as a fundamental input parameter
for cryptographic operations and also serves as an electronic
serial number within the application. A bidirectional security
model enables two-way authentication between a host system
and slave-embedded DS28E15. Slave-to-host authentication
is used by a host system to securely validate that an attached
or embedded DS28E15 is authentic. Host-to-slave authenti-
cation is used to protect DS28E15 user memory from being
modified by a unauthentic host. The DS28E15 communicates
over the single-contact 1-WireM bus at overdrive speed. The
communication follows the 1-Wire protocol with the ROM ID
acting as node address in the case of a multi-device 1-Wire
network.
● Minimalist 1-Wire Interface Lowers Cost and
Interface Complexity
• Reduces Control, Address, Data, Power, and
Programming Signals to a Single Data Pin
• ±8kV HBM ESD Protection (typ)
• 2-Pin SFN, 6-Pin TDFN-EP, and 6-Pin TSOC Packages
• Operating Range: 3.3V ±10%, -40°C to +85°C
Typical Application Circuit
R
= 1.1kΩ
P
2
MAXIMUM I C BUS CAPACITANCE 320pF
3.3V
Applications
● Authentication of Consumables
● Secure Feature Control
R
P
V
CC
SDA
SCL
2
(I C PORT)
ꢀꢁꢂꢃꢄꢅ
µC
1-Wire LINE
SLPZ
IO
ꢀꢁꢂꢆꢇꢈꢅ
DeepCover is a trademark and 1-Wire is a registered trademark of Maxim Integrated Products, Inc.
Visit Web Support to complete the nondisclosure agreement (NDA) required to receive additional product information.
Rev. 3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices
DOCUMENT FEEDBACK
for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change
without notice. No license is granted by implicationor otherwise under any patent or patent rights of Analog Devices. Trademarks andregistered
trademarks are the property of their respective owners.
TECHNICAL SUPPORT