The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF11 Series■2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
■Features of DF11 Insulation Displacement Machine
(
)
Single Core Punching Full Automatic ID Machine AM700/DF11
■■5 Major Features of ID Machine AM700/DF11
Low cost Multi-harness
1. Perform the multi-harness.
Data storage
2. The setup time has been widely reduced. (10 minutes maximum)
3. Space saving design.
Setup in 10 minutes
Half space
(About half space compared with the conventional machine)
4. Minimize initial cost with low cost.
5. The harness data can be saved in the floppy disk and easily
changed.
■Points
Since the DF11 insulation displacemention allows double rows ID with a single part, the harness service is completed with
machine connection only.
■Product Specifications
AWG #22 to #26
AWG #28
:
2A
Operating Temperature Range
-30 to 85ç Note 2
Current rating
(Note 1)
Crimping
Wire size
: 1A Operating Humidity Range
: 0.5A
40 to 80%
Rating
AWG #30
Insulation Displacement Wire size
AWG #26
: 1A Storage Temperature Range
-10 to 60ç Note 3
Voltage rating
Crimping
250V AC Insulation Displacement 100V AC Storage Humidity Range
40 to 70%
·
■UL CSA Safety Standard File No.
UL-CSA Safety Standard Approved Specification
AWG #22
UL
:E52653
: 2A
CSA
:LR95109
Current rating
Wire size
AWG #24 to #28
: 1A
Rating
AWG #30
30V AC
: 0.5A
Voltage rating
Item
1. Insulation Resistance 1000M ohms min.
2. Withstanding voltage No flashover or insulation breakdown.
3. Contact Resistance 30m ohms max.
Specification
Condition
500V DC
650V AC/1 minute
100mA
4. Single Insertion/Extraction Force 0.3N (30gf) min., 4.4N(450gf) max.
Measured by the square steel-made pin of 0.5 0.002mm
5. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes ■■5 to 35ç: 5 to 15 minutes
7. Temperature Cycle
Contact resistance: 30m ohms max. Insulation resistance: 1000M ohmsmin.
(-85ç: 30 minutes ■■5 to 35ç: 5 to 15 minutes) 5 cycles
Tin plated: 30 cycles
8. Durability (Mating/un-mating) Contact resistance: 30m ohms max.
Gold plated:50 cycles
Flow:
Manual soldering:
300ç for 2 seconds
Manual soldering:
260ç for 10 seconds
Reflow:
9. Resistance to Soldering heat No deformation of components affecting performance.
At the recommended temperature profile 300ç for 3 seconds
Note 1: Current rating of header is 2A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
104