5秒后页面跳转
DDB2503-220 PDF预览

DDB2503-220

更新时间: 2024-09-29 21:15:55
品牌 Logo 应用领域
思佳讯 - SKYWORKS 二极管
页数 文件大小 规格书
9页 677K
描述
Mixer Diode, Low Barrier, 700ohm Z(V) Max, Silicon, ROHS COMPLIANT, HERMETIC SEALED, CASE 220, 2 PIN

DDB2503-220 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active包装说明:S-CDMW-F2
针数:2Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8541.10.00.60
风险等级:5.29其他特性:LOW NOISE
配置:SINGLE二极管元件材料:SILICON
二极管类型:MIXER DIODE最大阻抗:700 Ω
最小阻抗:500 ΩJESD-30 代码:S-CDMW-F2
湿度敏感等级:1元件数量:1
端子数量:2最大工作频率:12.4 GHz
最小工作频率:8.2 GHz封装主体材料:CERAMIC, METAL-SEALED COFIRED
封装形状:SQUARE封装形式:MICROWAVE
峰值回流温度(摄氏度):260认证状态:Not Qualified
子类别:Other Diodes表面贴装:YES
技术:SCHOTTKY端子形式:FLAT
端子位置:DUAL处于峰值回流温度下的最长时间:40
肖特基势垒类型:LOW BARRIERBase Number Matches:1

DDB2503-220 数据手册

 浏览型号DDB2503-220的Datasheet PDF文件第2页浏览型号DDB2503-220的Datasheet PDF文件第3页浏览型号DDB2503-220的Datasheet PDF文件第4页浏览型号DDB2503-220的Datasheet PDF文件第5页浏览型号DDB2503-220的Datasheet PDF文件第6页浏览型号DDB2503-220的Datasheet PDF文件第7页 
DATA SHEET  
Silicon Schottky Barrier Diodes: Packaged, Bondable Chips  
and Beam Leads  
Applications  
Detectors  
Mixers  
Features  
Available in both P-type and N-type low barrier designs  
Low 1/f noise  
Large bond pad chip design  
Planar passivated beam-lead and chip construction  
efficiency during manual operations, and is ideal for automated  
assembly.  
Packages rated MSL1, 260 C per JEDEC J-STD-020)  
The choice of N- and P-type silicon allows the designer to  
optimize the silicon material for the intended application:  
Skyworks Pb-free products are compliant with  
all applicable legislation. For additional  
information, refer to Skyworks Definition of  
Lead (Pb)-Free, document number SQ04-0073.  
Doppler mixers and high-sensitivity detectors benefit from using  
the low noise characteristics of the P-type silicon.  
Low conversion loss mixers and biased detectors can be  
designed using standard N-type material.  
Description  
Skyworks packaged, beam-lead and chip Schottky barrier  
detector diodes are designed for applications through 40 GHz in  
the Ka band. They are made by the deposition of a suitable barrier  
metal on an epitaxial silicon substrate to form the junction. The  
process and choice of materials result in low series resistance  
along with a narrow spread of capacitance values for close  
impedance control. P-type silicon is used to obtain superior 1/f  
noise characteristics. N-type silicon is also available.  
Applications  
These diodes are categorized by Tangential Signal Sensitivity  
(TSS) for detector applications in four frequency ranges: S, X, Ku,  
and Ka bands. However, they can also be used as modulators,  
high-speed switches, and low-power limiters.  
TSS is a parameter that describes a diode’s detector sensitivity. It  
is defined as the amount of signal power, below a one-milliwatt  
reference level, required to produce an output pulse with an  
amplitude sufficient to raise the noise fluctuations by an amount  
equal to the average noise level. TSS is approximately 4 dB above  
the minimum detectable signal.  
Packaged diodes are suitable for use in waveguide, coaxial, and  
stripline applications. Beam-lead and chip diodes can also be  
mounted in a variety of packages or on special customer  
substrates.  
The P-type Schottky diodes in this Data Sheet are optimized for  
low noise in the 1/f region. They require a small forward bias (to  
reduce video resistance) if efficient operation is required. The bias  
not only increases sensitivity but also reduces parameter variation  
due to temperature change. Video impedance is a direct function  
of bias and follows the 26/l (mA) relationship. This is important to  
pulse fidelity, since the video impedance together with the  
detector output capacitance affects the effective amplifier  
bandwidth.  
Unmounted beam-lead diodes are especially well suited for use in  
Microwave Integrated Circuit (MIC) applications. Mounted beam-  
lead diodes can be easily used in MIC, stripline, or other such  
circuitry.  
These “universal chips” are designed for a high degree of device  
reliability in both commercial and industrial uses. The offset bond  
pad assures that no mechanical damage occurs at the junction  
during the wire bonding. Additionally, the 4 mil bond pad  
eliminates performance variation due to bonding, improves  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
200847F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 30, 2013  
1

与DDB2503-220相关器件

型号 品牌 获取价格 描述 数据表
DDB2503-250 SKYWORKS

获取价格

Mixer Diode, Low Barrier, X Band, 700ohm Z(V) Max, Silicon, ROHS COMPLIANT, PLASTIC, CASE
DDB2504-000 SKYWORKS

获取价格

Mixer Diode, Low Barrier, KU Band, 700ohm Z(V) Max, Silicon, ROHS COMPLIANT, CASE 491-006,
DDB2504-000-491-006 SKYWORKS

获取价格

Mixer Diode, KU Band, Silicon, BEAM LEAD PACKAGE-2
DDB2504-230 SKYWORKS

获取价格

Mixer Diode, Low Barrier, 700ohm Z(V) Max, Silicon, ROHS COMPLIANT, PLASTIC, CASE 230, 2 P
DDB2504-250 SKYWORKS

获取价格

Mixer Diode, Low Barrier, 700ohm Z(V) Max, Silicon, ROHS COMPLIANT, PLASTIC, CASE 250, 2 P
DDB25PNBT ETC

获取价格

PCB layouts
DDB25PWBT ETC

获取价格

PCB layouts
DDB2U20N12W1RF_B11 INFINEON

获取价格

EasyBRIDGE 1 1200 V、20 A二极管桥接模块,采用CoolSiC™肖特基
DDB2U30N08VR EUPEC

获取价格

IGBT-modules
DDB2U40N12W1RF_B11 INFINEON

获取价格

EasyBRIDGE 1 1200 V、40 A二极管桥接模块,采用CoolSiC™肖特基