D/CRCW-HR e3
www.vishay.com
Vishay
FUNCTIONAL PERFORMANCE
Derating
Axis Title
0.4
0.3
0.2
0.1
10000
D25/CRCW1206-HR
D12/CRCW0805-HR
D11/CRCW0603-HR
1000
100
10
0
-70 -60 -50 -40 -30 -20 -10
0
50
10 20 30 40
ϑamb - Ambient Temperature (°C)
60 70 80 90
100
150
110 120 130 140 160
70
TESTS AND REQUIREMENTS
All executed tests are carried out in accordance with the
following specifications:
The testing also covers most of the requirements specified
by EIA/IS-703 and JIS-C-5201-1.
EN 60115-1, generic specification
EN 60115-8, sectional specification
EN 140401-802, detail specification
IEC 60068-2-xx, test methods
The tests are carried out under standard atmospheric
conditions in accordance with IEC 60068-1, 4.3, whereupon
the following values are applied:
Temperature: 15 °C to 35 °C
Relative humidity: 25 % to 75 %
The parameters stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-802. The table presents only
the most important tests, for the full test schedule refer to
the documents listed above. However, some additional
tests and a number of improvements against those
minimum requirements have been included.
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
A climatic category LCT / UCT / 56 is applied, defined by the
lower category temperature (LCT), the upper category
temperature (UCT), and the duration of exposure in the
damp heat, steady state test (56 days). The components are
mounted for testing on boards in accordance with EN
60115-8, 2.4.2 unless otherwise specified.
Revision: 09-Feb-2022
Document Number: 20022
4
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000