CURRENT SENSE RESISTORS
The content of this specification may change without notification 06/08/07
CTL05/CTL16/CTL10/CTL18/CTL12/CTL01 Series Chip Resistor
PERFORMANCE
Maximum ∆ Ω
Test Item
Condition
F
G, J
Short Time Overload
± 0.1%
± 0.5%
2.5 times of the rated voltage shall be applied for 5 seconds
The resistor shall be subjected to rated voltage for 90 min. followed by a pause of 30
min. at a temperature of 70±3ºC. This constitutes 1 cycle. Cycles shall be repeated for
1000 hours.
Load Life
± 0.25%
± 0.5%
The resistor subjected to rated voltage for 90 min followed by a pause for 30 min at a
temperature of 60±2ºC with relative humidity of 90% to 95%. This constitutes 1 cycles.
Cycles shall be repeated for 1000 hours.
[-55ºC 30 min → +125ºC 30 min → R.T. 3 min] The resistor shall be subjected to 5
continuous cycles
Moisture Load Life
Temperature Cycle
± 0.25%
± 0.1%
± 0.5%
± 0.5%
Resistance to Solder
Heat
± 0.1%
± 0.1%
± 0.5%
± 0.5%
The resistor shall withstand dipped into solder for 10±1 sec. At 260±5ºC
Terminal Strength
Distance between fulcrums: 90mm; Bending width: 3 mm
Insulation Resistance
DC 500V for 1 min.
1000 Meg Ω or over
A new uniform coating of solder shall cover minimum of 95% of surface being immersed
The resistor shall be dipped into the solder of 215±5ºC for 3±0.5 seconds
Solderability
PACKAGE QUANTITY
Package Type
M
CTL05
10,000
CTL16
5,000
CTL10
5,000
CTL18
5,000
CTL12
5,000
CTL01
5,000
CTL1S
2,000
TAPE SCHEMATIC
REEL SCHEMATIC
TAPE DIMENSIONS (mm)
A
B
W
E
F
P1
T
Tp
CTL05
CTL16
CTL10
CTL18
CTL12
CTL01
CTL1S
0.65±0.1
1.1±0.2
1.65±0.2
2.0±0.15
2.9±0.1
3.4±0.1
3.4±0.1
1.15±0.1
1.9±0.2
2.4±0.2
3.6±0.15
5.3±0.1
6.6±0.1
6.6±0.1
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
12.0±0.2
12.0±0.2
12.0±0.2
1.75±0.10
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
5.5±0.05
5.5±0.05
5.5±0.05
2.0±0.05
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
0.55±0.1
0.70±0.1
0.85±0.1
0.85±0.1
1.0±0.1
1.0±0.1
1.0±0.1
0.20±0.05
0.20±0.05
0.20±0.05
0.20±0.05
0.25±0.1
0.25±0.1
0.25±0.1
REEL DIMENSIONS (mm)
LABEL DESCRIPTION
Reel
7”
10”
13”
M
H
1.20
C
G
E
F
One side surface of a reel is marked with a label
with the following items of information.
180 ± 3.0
13.0 ± 0.2
9.0 ± 0.3
60 ± 1.0
11.4 ± 1.0
1. Chip Resistor
2. Part Number
3. Tolerance
4. Quantity
* The suffix “L” indicates that this item is lead free. As of September 2004, all new
production items of this are lead free and in compliance with Lead Free/RoHS.
5. Lot # for production month/year/suffix L*
6. Manufacturer’s name or symbol
188 Technology Drive, Unit H, Irvine, CA 92618
2
TEL: 949-453-9888 FAX: 949-453-8889
American Accurate Components, Inc.