仕様書番号
Drawing No. JGC42-4256A
P. 4/12
5-4
はんだ耐熱性
Resistance to
Soldering Heat
(1)リフロー方式 下記プロファイルのリフロー炉に2回通した 表1及び4-3を満足しま
後、常温に取り出し1時間後測定する。 す。
(1)Re-flow
Soldering
Components shall be measured after applying The measured values
twice of the re-flow soldering with following shall meet Table 1 and
temperature profile and leaving in natural 4-3.
condition for 1 hour.
ピーク
Peak
(260°C 以下 / max.)
230
加熱部
180
150
Heating
(230°C)
予熱
Pre-heating
(150-180°C)
徐冷
Gradual
Cooling
30 秒以上
sec. min.
40 秒以内
sec. max.
120 秒以上
sec. min.
60 - 120 秒 / sec.
(2)コテ付け方式 温度+350±5℃で3.0±0.5秒間当て、常温に24 外観に異常がなく、表
時間放置後に測定する。但し、はんだこて先は 1 及 び 4-3 を 満 足 し ま
電極部に直接接触しない事とする。
す。
(2)Soldering
with iron
Components shall be measured after soldering No visible damage and
at +350±5°C for 3.0±0.5 seconds and leaving in the measured values
natural condition for 24 hours. The soldering shall meet Table 1 and
iron shall not touch the components while 4-3.
soldering.
5-5 はんだ付性
LFはんだ (Sn-3Ag-0.5Cu)
端子の90%以上にはん
PCT装置にて温度+105°C、湿度100%R.H.飽和 だが付着します。
の条件で、4時間のエージングをした後、端子
部分をロジンメタノール液に5秒浸した後、
+245±5°Cの溶融はんだ中に3±0.5秒間浸す。
Solderability
LF Solder (Sn-3Ag-0.5Cu)
The solder shall coat at
After being kept in pressure cooker at +105°C least 90% of the
temperature and 100%R.H. for 4 hours, surface of terminal.
terminals of components shall be immersed in
a soldering bath at temperature of +245±5°C
for 3±0.5 seconds after being placed in a rosin-
methanol for 5 seconds.
株式会社ꢀ村ꢀ田ꢀ製ꢀ作ꢀ所
Murata Manufacturing Co.,Ltd.