5秒后页面跳转
CR07W-P1C54-CD000 PDF预览

CR07W-P1C54-CD000

更新时间: 2024-02-27 15:14:19
品牌 Logo 应用领域
台湾光鼎 - PARALIGHT /
页数 文件大小 规格书
12页 536K
描述
Uniform high quality illumination

CR07W-P1C54-CD000 数据手册

 浏览型号CR07W-P1C54-CD000的Datasheet PDF文件第6页浏览型号CR07W-P1C54-CD000的Datasheet PDF文件第7页浏览型号CR07W-P1C54-CD000的Datasheet PDF文件第8页浏览型号CR07W-P1C54-CD000的Datasheet PDF文件第9页浏览型号CR07W-P1C54-CD000的Datasheet PDF文件第11页浏览型号CR07W-P1C54-CD000的Datasheet PDF文件第12页 
COB LED  
CR07W-P1C54-CD000  
REV:A/0  
Storage  
1. Do not open the moisture proof bag before the devices are ready to use.  
2. Before the package is opened, LED should be stored at temperatures less than 30and  
humidity less than 50%.  
3. LED may be stored for 6 months. When the storage time has reached more than 6 months,  
LED should be stored in a sealed container filled with Nitrogen gas.  
4. After the package is opened, LED should be stored at temperatures less than 30and  
humidity less than 30%.  
5. LED should be used within 168 hours (7 days) after the package is opened.  
E-Power Operating Procedure  
1. E-power 07W series products should be operated at 150 mA for ideal performance, but not  
more than200mA.  
2. E-power 07Wseries products are sensitive to static. Operators must wear static wristband  
(wireless static wristband is prohibited) and be well grounded while working in the  
environment with an ionizing air blower. Anti-static requirement should be under ESD  
2000V.  
3. Sufficient thermal management must be applied.Large LED forward current will cause high  
junction temperature and reduce LED life.  
4. Recommended Assembly Method is shown in Figure 1, E-powe 07Wseries products must  
be used in conjunction with heat-sinking devices and a thin layer of thermal grease should  
be applied to the bottom surface of the LED source  
Figure 1  
DRAWING NO. :DS-81-11-XXXX  
DATE : 2011-09-06  
Page : 10  

与CR07W-P1C54-CD000相关器件

型号 品牌 获取价格 描述 数据表
CR08 POWEREX

获取价格

Surface Mount, Phase Control SCR 0.8 Amperes/400-600 Volts
CR0800SA LITTELFUSE

获取价格

The CR range of protectors are based on the proven technology of the T10 thyristor product
CR0800SB LITTELFUSE

获取价格

The CR range of protectors are based on the proven technology of the T10 thyristor product
CR0800SC LITTELFUSE

获取价格

The CR range of protectors are based on the proven technology of the T10 thyristor product
CR0805 BOURNS

获取价格

Tight tolerances of bottom electrode width
CR0805 TTELEC

获取价格

Surface Mounted Resistors
CR0805 VISHAY

获取价格

RESISTOR, METAL GLAZE/THICK FILM, 0.1; 0.125W, 0.5; 1; 2; 5%, 50; 100; 200; 500ppm, 1ohm -
CR0805 jumper TTELEC

获取价格

High reliability thick film jumper, 1.5A
CR0805-10W- SILICON

获取价格

ISOLATED EVALUATION BOARD FOR THE Si3402B
CR0805-10W-10R0F SILICON

获取价格

ISOLATED EVALUATION BOARD FOR THE Si3402B