Datasheet > CR080510W-8661F

CR080510W-8661F

更新时间： 2024-09-24 01:09:39

品牌	Logo	应用领域
芯科 - SILICON		/
页数	文件大小	规格书
13页	452K
描述
NON-ISOLATED EVALUATION BOARD FOR THE Si3402B

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

CR080510W-8661F 数据手册

Si3402B-EVB

NON-ISOLATED EVALUATION BOARD FOR THE Si3402B

1. Description

The Si3402B non-isolated evaluation board (Si3402B-EVB Rev 2) is a reference design for a power supply in a

Power over Ethernet (PoE) Powered Device (PD) application. The Si3402B is described more completely in the

data sheet and application notes. This document describes the evaluation board. An evaluation board

demonstrating the isolated application is described in the Si3402B-ISO-EVB user’s guide.

2. Si3402B Board Interface

Ethernet data and power are applied to the board through the RJ45 connector (J1). The board itself has no

Ethernet data transmission functionality, but, as a convenience, the Ethernet transformer secondary is brought out

to the test points. Power may be applied in the following ways:

 Connecting a dc source to pins 1, 2 and 3, 6 of the Ethernet cable (either polarity)

 Connecting a dc source to pins 4, 5 and 7, 8 of the Ethernet cable (either polarity)

 Using an IEEE 802.3-2015-compliant, PoE-capable PSE, such as Trendnet TPE-1020WS

The Si3402B-EVB board schematics and layout are shown in Figures 1 through 6. The dc output is at connectors

J11(+) and J12(–).

Boards are generally shipped configured to produce +5 V output voltage but can be configured for +3.3 V or other

output voltages by changing resistors R5 and R6. Refer to “AN956: Using the Si3402B PoE PD Controller in

Isolated and Non-Isolated Designs” for more information. The preconfigured Class 3 signature can also be

modified according to Table 3 in AN956. The D8–D15 Schottky type diode bridge bypass is recommended only for

higher power levels (Class 3 operation). For lower power levels, such as Class 1 and Class 2, the diodes can be

removed. When the Si3402B is used in external diode bridge configuration, it requires that at least one pair of the

CTx and SPx pins be connected to the PoE voltage input terminals (to the input of the external bridge).

Rev. 1.1 4/16

Si3402B-EVB

12 3 4 5 6 7...13

中文翻译

下载PDF

型号	品牌	获取价格	描述	数据表
CR0805-8W-206J	SILICON	获取价格	Evaluation Board Rev 5.0 for the Si2493/57/34/15/04
CR0805-8W-4992F	SILICON	获取价格	NON-ISOLATED EVALUATION BOARD FOR THE Si3402B
CR0805-BI-8552ELF	BOURNS	获取价格	Bourns Chip Resistors and Arrays
CR0805-BU-8552ELF	BOURNS	获取价格	Bourns Chip Resistors and Arrays
CR0805-BV-8552ELF	BOURNS	获取价格	Bourns Chip Resistors and Arrays
CR0805-BW-8552ELF	BOURNS	获取价格	Bourns Chip Resistors and Arrays
CR0805-BX-8552ELF	BOURNS	获取价格	Bourns Chip Resistors and Arrays
CR0805C150RFP5	VISHAY	获取价格	RESISTOR, METAL GLAZE/THICK FILM, 0.1W, 1%, 50ppm, 150ohm, SURFACE MOUNT, 0805, CHIP
CR0805C1K80FP5	VISHAY	获取价格	RESISTOR, METAL GLAZE/THICK FILM, 0.1W, 1%, 50ppm, 1800ohm, SURFACE MOUNT, 0805, CHIP
CR0805C3K60FP5	VISHAY	获取价格	RESISTOR, METAL GLAZE/THICK FILM, 0.1W, 1%, 50ppm, 3600ohm, SURFACE MOUNT, 0805, CHIP