CHS120
GENERAL SPECIFICATIONS
INPUT-OUTPUT
ISOLATION INPUT-BASEPLATE
OUTPUT-BASEPLATE
DC2,250V or AC1,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20 15C)
DC2,250V or AC1,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20 15C)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20 15C)
*
*
5
5
*
*
6
6
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing) (Refer to “Derating”), 5,000m (16,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
SAFETY
2
VIBRATION
10 - 55Hz, 49.0m/s (5G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
196.1m/s (20G), 11ms, once each along X, Y and Z axis
AGENCY APPROVALS
UL60950-1, C-UL (CSA60950-1), EN60950-1
33.0X10.5X22.86mm [1.3X0.41X0.9 inches] (WXHXD) / 19g max
*
5
CASE SIZE/WEIGHT
33.5X12.7X23.36mm [1.32X0.5X0.92 inches] (WXHXD) / 28g max
36.5X12.7X26.5mm [1.44X0.5X1.04 inches] (WXHXD) / 32g max
Convection/Forced air/Conduction
OTHERS
*
6
COOLING METHOD
*1 At rated input (DC24V, DC48V) and rated load. Ta=25C, 2m/s.
*2 Ripple and ripple noise is measured by using measuring board with ceramic capacitor 22mF.
*3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*4 Refer to the instruction manual for input voltage derating.
*5 BasePlate Option.
*6 Baseplate and case option.
External view
Tolerance : 0.5
Dimensions in mm, [ ]=inches
¶
¶
1. DIP
33
Model
[1.3]
27.9
[1.1]
+VIN
RC
+VOUT
+S
TRM
-S
-VOUT
-VIN
0.25
3.68
[0.14]
10.5max
[0.41]
¶ Recommended size for processing PCB
(TOP VIEW)
27.9
[1.1]
2-º2
6-º1.5
¶
VOUT Pin
¶
º
VIN/RC/TRM/ S Pin
1.7
Out line
mm
[inch]
¶ Dimensions in:
0.1
º1
0.1
º1.5
¶ Div.:0.1inch
2. SMD (option S)
33
Model
[1.3]
27.9
[1.1]
+VIN
RC
+VOUT
+S
TRM
-S
-VOUT
-VIN
10.5max
[0.41]
¶ Recommended size for processing PCB
Adsorption point º6min
(TOP VIEW)
27.9
[1.1]
2-º3.4
6-º2.9
Coplanarity within 0.15
VOUT Pin
¶
¶
VIN/RC/TRM/ S Pin
Out line
+0
0.1
º2.4
-0.1
º1.9
mm
[inch]
¶ Dimensions in:
¶ Div.:0.1inch
July 07, 2020
CHS-7