CSD-SMA-2500 Surge Diverter
SMA Coaxial Cable Power Surge Protection
Specifications
Parameters
Frequency
< 2.5GHz
Insertion Loss
Max RF Power
Clamping Voltage
VSWR
<0.2dB
37W
90Vdc
1.20:1
Impedance
50Ohms
Max Discharge Current
Connectors
40kA (8/20us)
SMA Male - SMA Female
General
Size
41mm x 22mm (1.6” x 0.9”)
Plated Brass
Description
Housing
Mounting
Weight
The CSD-SMA-2500 Surge Diverter is a low insertion loss for applications
up to 2.5GHz. This in-line surge arrestor has SMA male and SMA female
connectors and fitted 6mm2 earth cable, that protects the module from the
impact of lightning/transients via the antenna port.
In-line between ELPRO product and coaxial cable
100g (3.5oz)
Note: Specifications subject to change.
The CSD-SMA-2500 is designed to be connected directly to the antenna port
allowing simple installation or retrofit.
Ordering
Used with the CC3, CC10, CC20 SMA male to N-type male coaxial cable kits,
allows connection to ELPRO products with SMA female/male antenna connector.
To order, select product code from the table and specify country of application.
Product Code
Description
Note: Surge Protection Devices rely on good earthing practices to be
effective. This product assumes both a metallic enclosure and good earth
connection to the enclosure. If in doubt, apply another earth under the locknut
to create a sufficient Earth.
CSD-SMA-2500
SMA Surge Diverter for use with CC3, CC10, CC20-SMA
Product Compatibility
The following products are compatible with this accessory. Please refer to
product datasheets for compatibility details to suit your application.
Also note: In applications of high vibration, it is recommended to use
CSD-N-6000 Surge Diverter.
Product Code
Description
Data Sheet #
Warning: Do not stand near or touch operating equipment during an electrical
storm as the CSD-SMA-2500 will not protect personnel.
CC3-SMA
CC10-SMA
CC20-SMA
Coaxial Cable Kit - 3m (9.8’)/10m
(32’)/20m (65’), N-type to SMA
7932
7947
7948
CCTAIL-SMA-F
Coaxial Cable Tail - 600mm (24”),
N-type Female to BNC/SMA Male
7951
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product
data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
©2013 Cooper Bussmann
www.cooperbussmann.com/wireless
0513 BU-SB13583
Page 1 of 1
Datasheet: 7959