CCD multichannel detector head C10150, C10151
ꢀꢀPin connection of "SIGNAL I/O" connector
15-pin D-sub connector
8
7
6
5
4
3
2
1
15 14 13
12 11 10
9
KACCC0069EA
Pin No.
1
Terminal name
Mode select
Description
Digital input signal used to select between the line binning operation and area scanning
operation.
HCMOS compatible.
High level or left open: line binning operation
Low level: area scanning operation
Analog video output. Positive polarity
Analog power supply
2
3
4
5
Data video
VA1+ (+15 V)
VA1- (-15 V)
VD1 (+5 V)
Analog power supply
Digital power supply
Digital input signal for initializing the circuit.
HCMOS compatible. Positive logic.
The interval of the Start pulses determines the integration time of the CCD image sensor.
Digital input signal for operating the circuit.
HCMOS compatible. Rising edge operation.
Digital output signal for indicating end-of-scan of the image sensor.
HCMOS compatible. Negative logic.
Analog ground
Analog ground
Analog power supply
Digital ground
Digital ground
6
Start
7
8
CLK
EOS
9
A. GND
A. GND
10
11
12
13
14
15
VA2 (+24 V)
D. GND
D. GND
D. GND
Trigger
Digital ground
Digital output signal for A/D conversion. HCMOS compatible. Positive logic.
ꢀꢀPin connection of "TE CONTROL I/O" connector (C10151)
9-pin D-sub connector
5
4
3
2
1
9
8
7
6
KACCC0075EA
Pin No.
Terminal name
VD2 (+5 V)
Description
1
2
Digital power supply
Temp monitor Analog output signal of the temperature of the CCD image sensor
Digital input signal for starting to cool down. HCMOS compatible.
Cooling control High level or left open: cooling
3
Low level: stand-by
Power supply for the thermoelectric cooler in the CCD image sensor.
(Please use AWG 18 wire)
4
Vp (+5 V)
5
6
7
VF (+12 V)
D. GND
D. GND
Power supply for cooling fan
Ground
Ground
Power supply return of the thermoelectric cooler mounted in the CCD image sensor.
(Please use AWG 18 wire)
8
P. GND
9
F. GND
Power supply return for cooling fan
Available for using same power supply (+5 V) for "+VD2" and "+Vp".
Caution) Do not connect "VD2" and "Vp" together on the backside of the 9-pin D-sub connector.
These may be connected (shorted) at the power supply end, not 9-pin D-sub connector.
5