FBR53 SERIES
nꢀSPECIFICATIONS
Specification
Item
Standard
Form U (Form A)
Silver Tin Oxide
Arrangement
Material
Contact rating
DC 14V, 25A (resistive load)
Maximum Carrying Current
30A continuous (15A each contact) at 25°C
60A inrush (30A each contact) at 25°C
Max. 100mV (1A, 12VDC) Average 1.5mΩ at 7A 12 VDC
Contact
Maximum Inrush Current
Contact Voltage Drop
Min. load (reference)*
1A, 6VDC
Coil Power Consumption
(at rated coil voltage)
600mW
Operate Coil Power
Operating Temperature Range
Storage Temperature Range
Operating Humidity
220mW
Coil
-40° C to +125° C (no frost)
-40° C to +125° C (no frost)
45 to 85%RH
Operate (at nominal voltage)
Release (at nominal voltage)
Mechanical
10 ms maximum
Time
Life
5 ms maximum
10x106 operations minimum (with no load for contact)
1x105 operations minimum (14VDC 20A resistive load)
10-55Hz,1.5mm dual amplitude, direction X, Y, Z
Electrical
Misoperation
10 to 100Hz, 1.5mm dual amplitude, direction X, Y, Z.
Not be damaged (mechanical and technical) after test.
Coil energizing: 1 hr in each direction, Coil non-
energizing: 1 hr in each direction
Vibration
resistance
Endurance
Misoperation
Endurance
100 m/s2 (11ms), direction X, Y, Z
1000 m/s2 (11ms), direction X, Y, Z, each 6 times
Not be damaged (mechanical and technical) after test.
Coil energizing: 3 times; Coil non-energizing: 3 times,
total 36 times.
Shock
resistance
Other
Solderability
at 270±10˚ C for 3±0.5sec. (terminals must be soldered)
Terminal
Pulling a terminal in its longitudinal direction for 10 sec.
at 9.8N (1 Kgf)
Strength
Weight
Approximately 6 grams
*This is the standard value of the minimum load level. This value may differ depending on the switching frequency, environmental
conditions and target reliability standard. We recommend to check this value by an actual load prior to use.
nꢀINSULATION
Item
Specification
Resistance
Minimum 100 MΩ 1 min.
500 VAC (50/60 Hz) ꢀ min.
500 VAC (50/60 Hz) ꢀ min.
Dielectric
Strength
open contacts
coil and contacts
3