MKP 338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
SAFETY APPROVALS X1
VOLTAGE
440 V (AC)
VALUE
10 nF to 1 µF
FILE NUMBERS
EN132400
14220
UL1414
UL1283 and CSA-C22.2 No.8
250 V (AC)
440 V (AC)
10 nF to 1 µF
10 nF to 1 µF
E112471
E109565
The Enec-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
16
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit
boards. The capacitors packed in bandoliers are designed
for mounting in printed-circuit boards by means of automatic
bmax = b + 0.3 mm
insertion machines.
eccentricity
For detailed tape specifications refer to Type detail
specification “HQN-384-01/102, Packaging information”.
Specific Method of Mounting to Withstand Vibration and
Shock
lmax = I + 0.3 mm
CBA116
In order to withstand vibration and shock tests, it must be
ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches ≤ 15 mm capacitors shall be mechanicelly fixed
by the leads
Storage Temperature
• Storage temperature: Tstg = 25 to + 40 °C with RH
maximum 80 % without condensation
• For longer pitches the capacitors shall be mounted in the
same way and the body clamped
Space Requirements on printed Circuit Board
Ratings and Characteristics Reference Conditions
The maximum length and width of film capacitors is shown in
Figure:
Unless otherwise specified, all electrical values apply to an
ambient temperature of 23 1 °C, an atmospheric pressure
of 86 to 106 kPa and a relative humidity of 50 2 %.
• Eccentricity as in figure. The maximum eccentricity is
smaller than or equal to the lead diameter of the product
concerned
For reference testing, a conditioning period shall be applied
over 96 4 hours by heating the products in a circulating air
oven at the rated temperature and a relative humidity not
exceeding 20 %.
• Product height with seating plane as given by “IEC 60717”
as reference: hmax. ≤ h + 0.3 mm
Document Number: 28116
Revision: 03-Mar-08
For technical questions, contact: rfi@vishay.com
www.vishay.com
171