1/4
STRUCTURE
PRODUCT NAME
TYPE
Silicon Monolithic Integrated Circuit
White LED driver for car navigation back light
BD8118FM
FEATURES
・Step-up DC/DC converter
Built in OSC
・Built in UVLO
・Built in OVP
・4 parallel current output (output current is set with external resister)
・LED open detection circuit
・PWM adjustment
・Built in TSD
・Built in OCP
・FAIL output (self diagnosis)
●ABSOLUTE MAXIMUM RATINGS (Ta=25℃)
PARAMETER
SYMBOL
VCC
LIMITS
UNIT
V
Power supply voltage(Pin : 1)
Load switch output voltage(Pin : 2)
LED output voltage(Pin : 12, 14, 15, 17)
FAIL output voltage(Pin : 3, 20)
Input voltage(Pin : 5, 6, 10, 11, 24)
VDAC input voltage(Pin : 8)
Power dissipation
36
VLOADSW
VLED
VOL
36
V
36
V
7
V
VIN
-0.3~7 < VCC
-0.3~7 < VCC
V
VDAC
Pd
V
※1
2.20
W
Junction Temperature
Tjmax
Topr
Tstg
150
℃
℃
℃
mA
Operating temperature range
Strage temperature range
-40~+95
-55~+150
※2※3
LED drive current(Pin : 12, 14, 15, 17)
ILED
150
※1 70mm×70mm×1.6mm glass epoxy mounting. Decline by 17.6mw/℃
※2 It is correlate LED drive current with VF dispersion each of current outputs. Refer to the technical note.
※3 Current maximum for 1ch. Do not however exceed Pd.
●Operating range(Ta=25℃)
PARAMETER
Power Supply Voltage(Pin : 1)
Oscillation frequency(Pin : 26)
SYMBOL
VCC
LIMITS
4.5~30
50~550
fosc~550
40~60
UNIT
V
FOSC
kHz
kHz
%
※4 ※5
External synchronous frequency(Pin : 6)
External synchronous pulse(Pin : 6)
FSYNC
FSDUTY
※4 SYNC have to be connected to GND when external synchronizing frequency is not needed.
※5 Don’t change external synchronous frequency to internal oscillation frequency when external synchronous frequency is inputted.
* This product is not designed for protection against radioactive rays.
REV. A