Datasheet
36V
1ch DC Brush Motor Drivers
BD62105AFVM
General Description
Key Specifications
BD62105AFVM is a built-in 1 channel H-bridge motor
driver for DC brush motors. This driver can facilitate low
power consumption by direct PWM. There are built in
protection circuits in this IC. Each protection circuit
operation, which contributes to set high reliability.
Power Supply Voltage Range:
Rated Output Current:
Rated Output Current (Peak):
Operating Temperature Range:
Output ON-Resistance:
8 to 28 V
0.5 A
1.0 A
-25 to +85°C
1.8 Ω (Typ)
(Total of upper and lower resistors)
Features
Package
MSOP8
W(Typ) x D(Typ)x H(Max)
2.90mm x 4.00mm x 0.90mm
Single Power Supply Input (rated voltage of 36V)
Rated Output Current (peak):0.5A(1.0A)
Low ON-Resistance DMOS Output
Forward, Reverse, Brake, Open
Power Save Function
External PWM Control
Driver for DC Brush Motor
Built-in logic input pull-down resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lock out Circuit (UVLO)
Over Voltage Lock out Circuit (OVLO)
Ghost Supply Prevention (protects against malfunction
when power supply is disconnected)
Adjacent Pins Short Protection
Inverted Mounting Protection
Figure 1.MSOP8
Typical Application Circuit
MSOP8 package
Application
VCC
Plain Paper Copier (PPC), Multi-function Printer, Laser
Printer, Inkjet Printer, Photo Printer, FAX, Mini Printer and
etc.
OUT1
IN1
IN2
OUT2
GND
TEST
Figure 2. Typical Application Circuit
○Product structure:silicon monolithic integrated circuit ○This product has no designed protection against radioactive rays.
www.rohm.com
TSZ02201-0P2P0B301540-1-2
23.Jun.2017 Rev.001
© 2017 ROHM Co., Ltd. All rights reserved.
1/15
TSZ22111・14・001