Datasheet
36V 1ch
DC Brush Motor Drivers
BD62120AEFJ
General Description
Key Specifications
BD62120AEFJ is a built-in 1 channel H-bridge motor
driver for DC brush motors. This driver can facilitate low
power consumption by direct PWM. There are built in
protection circuits in this IC. Each protection circuit
operation contributes to set high reliability.
Power Supply Voltage Range:
Rated Output Current:
Rated Output Current (Peak):
Operating Temperature Range:
Output ON-Resistance:
8 to 28 [V]
2.0 [A]
3.0 [A]
-25 to +85 [°C]
0.65 [Ω] (Typ)
(Total of upper and lower resistors)
Features
Package
HTSOP-J8
W(Typ) x D(Typ)x H(Max)
4.90mm x 6.00mm x 1.00mm
Single Power Supply Input (rated voltage of 36V)
Rated Output Current (peak) 2.0A(3.0A)
Low ON-Resistance DMOS Output
Forward, Reverse, Brake, Open
External PWM Control
Driver for DC Brush Motor
Built-in logic input pull-down resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lock out Circuit (UVLO)
Over Voltage Lock out Circuit (OVLO)
Ghost Supply Prevention (protects against malfunction
when power supply is disconnected)
Adjacent Pins Short Protection
Inverted Mounting Protection
HTSOP-J8 package
Typical Application Circuit
Application
Plain Paper Copier (PPC), Multi-function Printer,
Laser Printer, Inkjet Printer, Photo Printer, FAX,
Mini Printer and etc.
VCC
OUT1
TEST
IN1
IN2
OUT2
GND
Figure 1. Typical Application Circuit
○Product structure:silicon monolithic integrated circuit ○This product has no designed protection against radioactive rays.
www.rohm.com
TSZ02201-0P2P0B301600-1-2
2017.06.21 Rev.001
© 2017 ROHM Co., Ltd. All rights reserved.
1/14
TSZ22111・14・001