Datasheet
Automotive IPD Series
5ch Low Side Switch with Built-in LDO
BD5LL20AEFV-C
General Description
Key Specifications
BD5LL20AEFV-C is 5-channel SPI-input low side switch
developed as engine control. It has built-in open load
detection function, over current protection function,
thermal shutdown function, and active clamp function. It
also has a 5 V output LDO as a power supply for the
microcontroller and a built-in K-LINE communication
circuit, making it suitable for motorcycle engine control.
◼ Power Supply Operating Range VX:
◼ Power Supply Operating Range VS:
◼ LDO Output Voltage:
◼ LDO Over Current Threshold Value: 250 mA (Min)
◼ On Resistance(Note 1)
200 mΩ / 540 mΩ (Typ)
◼ Over Current Threshold Value: 2.0 A / 0.5 A (Min)
◼ Active Clamp Energy(Note 1)
300 mJ / 250 mJ
6 V to 18 V
6 V to 8 V
5.0 V (Typ)
:
:
◼ Operating Temperature Range: -40 °C to +150 °C
(Note 1) (OUT1 ,OUT2, OUT3) / (OUT4, OUT5) value
Features
◼ AEC-Q100 Qualified(Note 1)
Package
W (Typ) x D (Typ) x H (Max)
6.5 mm x 6.4 mm x 1.0 mm
HTSSOP-B20
◼ Monolithic Power Management IC with Control Block
(CMOS) and a Power MOSFET mounted on a Single
Chip
◼ Each Channel Control/Error can be detected by 16 bit
SPI Commands
◼ Built-in Open Load Detection Function (OLD)
◼ Built-in Over Current Protection Function (OCP)
◼ Built-in Thermal Shutdown Function (TSD)
◼ Built-in Active Clamp Function
◼ Built-in 5 V Output LDO
◼ Built-in K-LINE Communication Circuit
◼ Surface-mount HTSSOP-B20 Packaging
(Note 1) Grade 1
HTSSOP-B20
Application
◼ Driving Resistive and Inductive Load
Typical Application Circuit
Battery
VS
VS
+
V5O
+
OUT1
IN1
CSB
SI
OUT2
OUT3
μ-con
SCLK
SO
OUT4
OUT5
KIO
RX
VX
TX
AGND PGND
〇Product structure : Silicon integrated circuit 〇This product has no designed protection against radioactive rays.
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
TSZ02201-0G5G1G400200-1-2
13.Jan.2023 Rev.001
1/45