AZ770
COIL
NOTES
Power
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. The vibration resistance is 0.6 mm DA at 10–55 Hz for the
N.C. contact, if vibration is in length direction.
At Pickup Voltage
(typical)
253 mW (standard coil)
113 mW (sensitive coil)
130 mW (sensitive coil high capacity
version “T”)
4. Specifications subject to change without notice.
Max. Continuous
Dissipation
760 mW at 20°C (68°F) ambient
Temperature Rise
(at nominal voltage)
41°C (74°F) standard coil
22°C (40°F) sensitive coil
27°C (49°F) sensitive coil high capacity
version “T”
Temperature
Max. 155°C (311°F)
RELAY ORDERING DATA
STANDARD COIL - TYPE 1 FOOTPRINT
COIL SPECIFICATIONS
ORDER NUMBER*
Coil Resistance
Nominal Coil
VDC
Must Operate
Max. Continuous
Form A (SPST)
Form C (SPDT)
VDC
VDC
Ohm ± 10
AZ770-1C-3D
AZ770-1C-5D
AZ770-1C-6D
AZ770-1C-9D
AZ770-1C-12D
AZ770-1C-18D
AZ770-1C-24D
AZ770-1C-48D
3
5
2.25
3.75
3.9
6.6
20
55
AZ770-1A-3D
AZ770-1A-5D
AZ770-1A-6D
AZ770-1A-9D
AZ770-1A-12D
AZ770-1A-18D
AZ770-1A-24D
AZ770-1A-48D
6
4.50
7.8
80
9
6.75
11.7
15.6
23.4
31.2
62.4
180
12
18
24
48
9.00
320
13.50
18.00
36.00
720
1,280
5,120
* “1A” or “1C” denote silver nickel contacts.
Substitute “AZ770T-1AE” in place of “AZ770-1A” for high capacity version.
Add suffix “E” at the end of order number for sealed version.
Add suffix “K” at the end of order number for different footprint (Type 2); not available for high capacity version “T”.
Add suffix “G” at the end of order number for gold plated contacts.
SENSITIVE COIL (STANDARD VERSION) - TYPE 1 FOOTPRINT
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
Form A (SPST)
3
5
2.25
3.75
5.1
8.5
45
125
AZ770-1A-3DS
AZ770-1A-5DS
AZ770-1A-6DS
AZ770-1A-9DS
AZ770-1A-12DS
AZ770-1A-18DS
AZ770-1A-24DS
6
4.50
10.2
15.3
20.4
30.6
40.8
180
9
6.75
400
12
18
24
9.00
720
13.50
18.00
1,600
2,800
* “1A” or “1C” denote silver nickel contacts.
Add suffix “E” at the end of order number for sealed version.
Add suffix “K” at the end of order number for different footprint (Type 2).
Add suffix “G” at the end of order number for gold plated contacts.
9-2-11