ATS/ATS-SM Series
Low Cost Quartz Crystal
PACKAGING INFORMATION
ATS Radial Taping (Ammopak)
DIMENSIONS IN MILLIMETERS
Ø4.00
22.50 Max
18.00
18.00
0.90 Max
3.81
12.70
ATS-SM Tape and Reel
DIMENSIONS IN MILLIMETERS
24.40
2.00
Ø13.00
Ø1.55
12.00
4.00
1.75
4.35
120°
11.50
24.00
Ø330
Ø80
0.40
5.10
Ø21.00
DIRECTION OF FEED
ENVIRONMENTAL SPECIFICATIONS
Temperature Cycle:
Mechanical Shock:
Sinusoidal Vibration:
400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1 minute transfer time
between temperatures.
1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3 mutually perpendicular
planes (18 total shocks).
0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles each in 3 mutually
perpendicular planes (9 times total).
Gross Leak:
Fine Leak:
No leak shall appear while immersed in an FC40 or equivalent liquid at +125°C for 20 seconds.
Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent.
Resistance to Solder Heat:
High Temperature Operating Bias:
Frequency Aging:
Product must survive 3 reflows of +250°C maximum, 10 seconds maximum.
2,000 hours at +125°C, disregarding frequency shift.
1,000 hours at +85°C, maximum ±5 ppm shift.
500M Ohms @ 100VDC ±15VDC.
Insulation Resistance:
Moisture Sensitivity Level:
Level 1 per JEDEC J-STD-020.
Document No. 008-0309-0
Page 6 - 6
Rev. I