ATR4251

更新时间： 2024-01-28 05:53:13

品牌	Logo	应用领域
爱特美尔 - ATMEL		放大器
页数	文件大小	规格书
21页	414K
描述
Low-noise, High-dynamic-range Antenna Amplifier IC

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ATR4251 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	SSOP	包装说明：	LSSOP,
针数：	20	Reach Compliance Code：	unknown
HTS代码：	8542.39.00.01	风险等级：	5.58
Is Samacsys：	N	商用集成电路类型：	CONSUMER CIRCUIT
JESD-30 代码：	R-PDSO-G20	长度：	6.75 mm
功能数量：	1	端子数量：	20
最高工作温度：	90 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	LSSOP
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
认证状态：	Not Qualified	座面最大高度：	1.35 mm
最大供电电压 (Vsup)：	11 V	最小供电电压 (Vsup)：	8 V
表面贴装：	YES	技术：	BICMOS
温度等级：	INDUSTRIAL	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	DUAL
宽度：	4.4 mm	Base Number Matches：	1

ATR4251 数据手册

3.2

AM AGC

The IC is equipped with an AM AGC capability to prevent overdriving of the amplifier in case the

amplifier operates near strong antenna signal level, for example, transmitters.

The AM amplifier output AMOUT1 is applied to a resistive voltage divider. This divided signal is

applied to the AGC level detector input pin AGCAMIN. The rectified signal is compared against

an internal reference. The threshold of the AGC can be adjusted by adjusting the divider ratio of

the external voltage divider. If the threshold is reached, pin AGCAM opens an external transistor

which controls PIN diode currents and limits the antenna signal and thereby prevents overdriv-

ing the AM amplifier IC.

3.3

FM Amplifier

The FM amplifier is realized with a single NPN transistor. This allows use of an amplifier config-

uration optimized on the requirements. For low-cost applications, the common emitter

configuration provides good performance at reasonable bills of materials (BOM) cost⁽¹⁾. For

high-end applications, common base configuration with lossless transformer feedback provides

a high IP3 and a low noise figure at reasonable current consumption⁽²⁾. In both configurations,

gain, input, and output impedance can be adjusted by modification of external components.

The temperature compensated bias voltage (VREF1) for the base of the NPN transistor is

derived from an integrated band gap reference. The bias current of the FM amplifier is defined

by an external resistor.

Notes: 1. See test circuit (Figure 8-1 on page 11)

2. See application circuit (Figure 9-1 on page 12)

3.4

FM/TV AGC

The IC is equipped with an AGC capability to prevent overdriving the amplifier in cases when the

amplifier is operated with strong antenna signals (for example, near transmitters).

It is possible to realize an external TV antenna amplifier with integrated AGC and external RF

transistor. The bandwidth of the integrated AGC circuit is 900 MHz.

FM amplifier output FMOUT is connected to a capacitive voltage divider and the divided signal is

applied to the AGC level detector at pin AGCIN. This level detector input is optimized for low dis-

tortion. The rectified signal is compared against an internal reference. The threshold of the AGC

can be adjusted by adjusting the divider ratio of the external voltage divider. If the threshold is

reached, pin AGC1 opens an external transistor which controls the PIN diode current, this limits

the amplifier input signal level and prevents overdriving the FM amplifier.

ATR4251

4913J–AUDR–10/09

1...3 4 567 8 9...21

下载PDF

与ATR4251相关器件

型号	品牌	描述	获取价格	数据表
ATR4251_09	ATMEL	Low-noise, High-dynamic-range Antenna Amplifier IC	获取价格
ATR4251C	MICROCHIP	Integrated low-noise AM/FM antenna amplifier with automatic gain control. Built on BiCMOS2	获取价格
ATR4251C-PFPY	MICROCHIP	Consumer Circuit, BICMOS	获取价格
ATR4251C-PFQW	MICROCHIP	IC ANTENNA AMPLIFIER 24QFN	获取价格
ATR4251C-PFQY	MICROCHIP	Consumer Circuit, BICMOS	获取价格
ATR4251C-TKQW	MICROCHIP	IC ANTENNA AMPLIFIER 20SSO	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

ATR4251

ATR4251 技术参数

ATR4251 数据手册

与ATR4251相关器件

与ATR4251相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ATR4251

ATR4251 技术参数

ATR4251 数据手册

与ATR4251相关器件

与ATR4251相关文章

您还可以找

您在本页遇到什么问题？