ATF16V8CZ
Figure 2-3. PLCC
I3
I4
I5
I6
I7
4
5
6
7
8
18 I/O
17 I/O
16 I/O
15 I/O
14 I/O
3. Absolute Maximum Ratings*
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Temperature Under Bias.................................. -40°C to +85°C
Storage Temperature..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground .........................................-2.0V to +7.0V(1)
Voltage on Input Pins
with Respect to Ground
During Programming.....................................-2.0V to +14.0V(1)
Note:
1. Minimum voltage is -0.6V DC, which may under-
shoot to -2.0V for pulses of less than 20 ns.
Maximum output pin voltage is VCC + 0.75V DC,
which may overshoot to 7.0V for pulses of less
than 20 ns.
Programming Voltage with
Respect to Ground .......................................-2.0V to +14.0V(1)
4. DC and AC Operating Conditions
Commercial
Industrial
-40°C - 85°C
5V ±10%
Operating Temperature (Ambient)
VCC Power Supply
0°C - 70°C
5V ±5%
4.1
DC Characteristics
Symbol
Parameter
Condition
Min
Typ
Max
-10
10
Units
µA
IIL
Input or I/O Low Leakage Current
Input or I/O High Leakage Current
0 ≤ VIN ≤ VIL(Max)
3.5 ≤ VIN ≤ VCC
IIH
µA
Com
Ind.
95
mA
mA
µA
15 MHz, VCC = Max,
VIN = 0, VCC, Outputs Open
ICC1
Power Supply Current
105
Com.
Ind
5
5
Power Supply Current,
Standby Mode
0 MHz, VCC = Max,
VIN = 0, VCC, Outputs Open
(1)
ICC
µA
V
OUT = 0.5V;
IOS
Output Short Circuit Current
-150
mA
VCC= 5V; TA = 25°C
VIL
VIH
Input Low Voltage
Input High Voltage
Min < VCC < Max
-0.5
2.0
0.8
V
V
VCC+1
VCC = Min, All Outputs
IOL = -16 mA
VOL
Output Low Voltage
Com, Ind.
0.5
V
3
0453H–PLD–7/05