Atmel AT27C1024
4.
Absolute maximum ratings*
*NOTICE: Stresses beyond those listed under “Absolute maximum
ratings” may cause permanent damage to the device. This
is a stress rating only, and functional operation of the
device at these or any other conditions beyond those
indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating
Temperature under bias . . . . . . . . . . . . .-55C to + 125C
Storage temperature . . . . . . . . . . . . . . . .-65C to + 150C
Voltage on any pin with
respect to ground . . . . . . . . . . . . . . . . . . .-2.0V to + 7.0V(1)
conditions for extended periods may affect device reliability.
Voltage on A9 with
respect to ground . . . . . . . . . . . . . . . . -2.0V to + 14.0V(1)
VPP supply voltage with
respect to ground . . . . . . . . . . . . . . . . . -2.0V to + 14.0V(1)
Note:
1. Minimum voltage is -0.6V DC, which may undershoot to -2.0V for pulses of less than 20ns. Maximum output pin voltage is
CC + 0.75V DC, which may overshoot to +7.0V for pulses of less than 20ns.
V
5.
DC and AC characteristics
Table 5-1.
Operating modes
Mode/Pin
Read
CE
VIL
X
OE
VIL
VIH
X
PGM
X(1)
X
Ai
VPP
X
Outputs
DOUT
Ai
Output disable
X
X
High Z
High Z
DIN
Standby
VIH
VIL
VIL
VIH
X
X
X(5)
VPP
VPP
VPP
Rapid program(2)
PGM verify
VIH
VIL
X
VIL
VIH
X
Ai
Ai
DOUT
PGM inhibit
X
High Z
(3)
A9 = VH
Product identification(4)
VIL
VIL
X
A0 = VIH or VIL
A1 - A15 = VIL
VCC
Identification code
Notes: 1. X can be VIL or VIH.
2. Refer to programming characteristics.
3. VH = 12.0 0.5V.
4. Two identifier words may be selected. All Ai inputs are held low (VIL), except A9, which is set to VH, and A0, which is tog-
gled low (VIL) to select the manufacturer’s identification word and high (VIH) to select the device code word.
5. Standby VCC current (ISB) is specified with VPP = VCC. VCC > VPP will cause a slight increase in ISB.
Table 5-2.
DC and AC operating conditions for read operation
Atmel AT27C1024
-45
-70
Ind.
-40C - 85C
-40C - 85C
Operating temp. (case)
VCC power supply
Auto.
5V 10%
5V 10%
3
0019N–EPROM–4/11