AT27C040
Operating Modes
Mode/Pin
CE
VIL
X
OE
VIL
VIH
X
Ai
VPP
X(1)
Outputs
DOUT
Read
Ai
Output Disable
Standby
X
X
X
High Z
VIH
VIL
X
X
High Z
Rapid Program(2)
VIH
VIL
VIH
VIL
Ai
Ai
VPP
VPP
VPP
X
DIN
PGM Verify
DOUT
PGM Inhibit
Product Identification(4)
VIH
VIL
X
High Z
(3)
A9 = VH
Identification Code
A0 = VIH or VIL
A1 - A18 = VIL
Notes: 1. X can be VIL or VIH.
2. Refer to Programming Characteristics
3. VH = 12.0 ± 0.5V.
4. Two identifier bytes may be selected. All Ai inputs are held low (VIL), except A9 which is set to VH and A0 which is toggled
low (VIL) to select the Manufacturer’s Identification byte and high (VIH) to select the Device Code byte.
Absolute Maximum Ratings*
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect
device reliability.
Temperature Under Bias................................ -55°C to +125°C
Storage Temperature..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground ............................................-2.0V to +7.0V
Voltage on A9 with
Respect to Ground .........................................-2.0V to +14.0V
VPP Supply Voltage with
Respect to Ground ..........................................-2.0V to +14.0V
3
0189F–EPROM–4/03