ASL331
Wideband Linear Push-pull Amplifier MMIC
Features
Description
The ASL331, a wideband linear push-pull amplifi-
er MMIC, has a high linearity and low noise over a
wide range of frequency 5 MHz to 1 GHz, being
suitable for use in the fiber receiver, distribution
amplifiers and drop amplifiers of CATV systems,
and in the mobile wireless repeaters and BTS.
The amplifier is available in an SOIC-8 package
and passes through the stringent DC, RF, and
reliability tests.
·High Linearity 41 dBm OIP3
·Low Noise Figure 1.6 dB
·26 dBm P1dB
ASL331
·75 Ohm Input / Output Match
·Bandwidth 5 ~ 1000 MHz
·Single Supply 5 V
Package Style: SOIC-8
Typical Performance
Parameters
Frequency
Noise Figure
Gain
Units
MHz
dB
Typical
Application Circuit
5
1.6
50
1.4
500
1.6
19.7
-18
-15
26
860
1.9
19
·50 ~ 1000 MHz
·5 ~ 300 MHz ( Without LPF )
·5 ~ 300 MHz ( LPF )
dB
20.9
-20
-20
25
20.2
-20
S11
dB
-20
-18
26
S22
dB
-20
Output P1dB
Output IP3
Output IP21),2),3) (dBm)
CSO4)
dBm
dBm
dBm
dBc
dBc
mA
V
26
37.51)
41.52)
412)
41.52)
60
70
62
56
64
60
CTB4)
Current
220
5
Device Voltage
1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 1 MHz.
2) OIP3 and OIP2 are measured with two tones at an output power of +12 dBm/tone separated by 6 MHz.
3) OIP2 is measured at F1+F2 Frequency.
4) Pout = 101 dBuV for 84 channels VHF signal.
Product Specifications
Parameters
Testing Frequency
Gain
Units
MHz
dB
Min
Typ
500
19.7
-18
-15
41
Max
S11
dB
S22
dB
Output IP3
Noise Figure
Output P1dB
Current
dBm
dB
1.6
26
dBm
mA
V
220
5
Device Voltage
Pin Configuration
Absolute Maximum Ratings
Pin No.
Function
RF IN 1
NC
Parameters
Operating Case Temperature
Storage Temperature
Rating
1
-40 to +85°C
-40 to +150°C
+6 V
2,3,6,7
4
5
RF IN 2
RF OUT 2
Device Voltage
Operating Junction Temperature
Input RF Power (CW, 75 ohm matched)
Maximum Current
+160°C
8 dBm
8
RF OUT 1
300 mA
Thermal Resistance
18 °C/W
1/6
ASB Inc. · sales@asb.co.kr
·
Tel: +82-42-528-7223
March 2012