5秒后页面跳转
AS2931CU-5.0 PDF预览

AS2931CU-5.0

更新时间: 2024-02-06 03:12:34
品牌 Logo 应用领域
其他 - ETC 稳压器
页数 文件大小 规格书
5页 113K
描述
Positive Fixed Voltage Regulator

AS2931CU-5.0 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
包装说明:, SIP3,.1TBReach Compliance Code:unknown
风险等级:5.92可调性:FIXED
标称回动电压 1:0.07 V最大绝对输入电压:26 V
JESD-609代码:e0最大电网调整率:0.03%
最大负载调整率:0.05%输出次数:1
端子数量:3工作温度TJ-Max:85 °C
工作温度TJ-Min:-40 °C最大输出电流 1:0.1 A
标称输出电压 1:5 V封装主体材料:PLASTIC/EPOXY
封装等效代码:SIP3,.1TB认证状态:Not Qualified
子类别:Other Regulators表面贴装:NO
技术:BIPOLAR端子面层:Tin/Lead (Sn/Pb)
端子节距:2.54 mm端子位置:SINGLE
最大电压容差:5%

AS2931CU-5.0 数据手册

 浏览型号AS2931CU-5.0的Datasheet PDF文件第1页浏览型号AS2931CU-5.0的Datasheet PDF文件第2页浏览型号AS2931CU-5.0的Datasheet PDF文件第4页浏览型号AS2931CU-5.0的Datasheet PDF文件第5页 
AS2931  
factor of two over the value needed for the entire  
temperature range.  
Application Hints  
The AS2931 requires an output capacitor for device stability.  
The value required varies greatly depending upon the  
application circuit and other factors. The high frequency  
characteristics of electrolytic capacitors depend greatly on the  
type and also on the manufacturer. Sometimes only bench  
testing is the only means to determine the proper capacitor  
Other points with linear regulators is that the twitch higher  
output current stability decreases. In most applications the  
AS2931 is operating at few milliamps. In these applications  
the output capacitance can be further reduced. For example,  
when the regulator is running at 10mA output current the  
output capacitance value is half compared to the same  
regulator that is running at 100 mA.  
type and value.  
The high quality 100 µF aluminum  
electrolytic covers all general application circuits, this stability  
can be obtained with a tantalum electrolytic value of 47 µF.  
With the AS2931 adjustable regulator, the minimum value  
of output capacitance is a function of the output voltage.  
The value decreases with higher output voltages, since the  
internal loop gain is reduced.  
Another critical point of electrolytic characteristics is its  
performance over temperature. The AS2931 is designed to  
operate starting at -40°C which may not be true in the case of  
electrolytic. Higher temperatures generally no problem. The  
electrolytic. type in aluminum will freeze around -30°C. This  
could cause an oscillation at output of regulator. At a lower  
temperature requirement by many applications the capacitor  
should maintain its performance. So as a result, for an  
application which regulator junction temperature does not  
exceed 25°C, the output capacitor can be reduced by the  
The worst case occurs at the lower temperature and  
maximum operating currents, the entire circuit and the  
electrolytic, should be cooled down to the minimum  
temperature. The minimum of 0.6 volts required at the input  
of regulator above the output to keep the power dissipation  
and die heating to its minimum. After the value for the  
capacitor has been determined for actual use, the value  
should be doubled.  
Rev. 10/11/00  

与AS2931CU-5.0相关器件

型号 品牌 描述 获取价格 数据表
AS2931CU-ADJ CALOGIC Adjustable Positive LDO Regulator, 3V Min, 24V Max, 0.6V Dropout, BIPolar, PSFM5, TO-220,

获取价格

AS2931M1-3.0 CALOGIC Fixed Positive LDO Regulator, 3V, 0.6V Dropout, BIPolar, PSSO3, SOT-89, 3 PIN

获取价格

AS2931M1-3.3 CALOGIC Fixed Positive LDO Regulator, 3.3V, 0.6V Dropout, BIPolar, PSSO3, SOT-89, 3 PIN

获取价格

AS2931M1-3.5 CALOGIC Fixed Positive LDO Regulator, 3.5V, 0.6V Dropout, BIPolar, PSSO3, SOT-89, 3 PIN

获取价格

AS2931M1-4.0 CALOGIC Fixed Positive LDO Regulator, 4V, 0.6V Dropout, BIPolar, PSSO3, SOT-89, 3 PIN

获取价格

AS2931M1-4.2 CALOGIC Fixed Positive LDO Regulator, 4.2V, 0.6V Dropout, BIPolar, PSSO3, SOT-89, 3 PIN

获取价格