AS1339
Datasheet - Pinout
4 Pinout
Figure 2. Pin Assignments (Top View)
NC
A1
AGND
A2
REFIN
A3
PGND
A4
PA_EN
B2
LDO2
B1
EN2
B3
LX
B4
IN2
C1
TEST
C2
IN1B
C3
IN1A
C4
LDO1
D1
EN1
D2
PAB
D3
PAA
D4
Pin Description
Table 1. Pin Description
Pin Name
NC
Pin Number
Description
Not Connected. Free, high impedance for normal operation. Used for
A1
A2
internal test purpose.
Low-Noise Analog Ground
AGND
DAC-Controlled Input. Reference voltage for buck converter. The output of
the PA step-down converter is regulated to 2.5 x VREFIN. Bypass mode is
enabled when VIN ≤ 2.69V x VREFIN.
REFIN
PGND
LDO2
A3
A4
B1
Power Ground for PA Step-Down Converter
10mA LDO Regulator 2 Output. Connect LDO2 with a 0.1μF ceramic
capacitor as close as possible to LDO2 and AGND. LDO2 is internally pulled
down through a 100Ω resistor when this regulator is disabled.
PA Step-Down Converter Enable Input. For normal operation, connect to
logic-high. For shutdown mode, connect to logic-low. The pin is internally
pulled down through a 110kΩ resistor.
PA_EN
B2
Enable Input for LDO2. For normal operation, connect to logic-high. For
shutdown mode, connect to logic-low. The pin is internally pulled down
through a 110kΩ resistor.
EN2
LX
B3
B4
Inductor Connection. Connect an inductor from LX to the output of the PA
step-down converter.
www.austriamicrosystems.com
Revision 1.04
2 - 25