AS1346-49
Dual Step-Down Converter with Battery Monitoring
1 General Description
2 Key Features
High Efficiency: Up to 95%
Output Current: see Table 1
Input Voltage Range: 2.7V to 5.5V
The AS1346, AS1347, AS1348, AS1349 family is a high-efficiency,
constant-frequency dual buck converter available with fixed voltage
versions. The device provides two independent DC/DC Converters
with output currents between 0.5A and 1.2A. The wide input voltage
range (2.7V to 5.5V), automatic powersave mode and minimal
external component requirements make the AS134x family perfect
for SSD and many other battery-powered applications.
Output Voltage Range: 1.2V to 3.6V (available in 100mV steps)
Constant Frequency Operation: 2.0MHz
In shutdown mode the typical supply current decreases to ≤1μA.
The highly efficient duty cycle (100%) provides low dropout
operation, prolonging battery life in portable systems.
180º Out of Phase Operation
Low Battery Detection
An internal synchronous switching scheme increases efficiency and
eliminates the need for an external Schottky diode. The fixed
switching frequency (2.0MHz) allows the use of small surface mount
inductors.
Low Dropout Operation: 100% Duty Cycle
Shutdown Mode Supply Current: 1μA
No Schottky Diode Required
The integrated monitoring function can be configured that either the
output voltage (Power Okay function ) or the input voltage (Battery
Monitoring Function) can be supervised.
Output Disconnect in Shutdown
Non standard variants available within two weeks
12-Pin TDFN 3x3mm Package
Table 1. Available Products
Devices
AS1346
AS1347
AS1348
AS1349
IOUT1
1.2A
0.5A
0.5A
1.2A
IOUT2
0.5A
3 Applications
0.5A
The device is ideal for SSD applications, mobile communication
devices, laptops and PDAs, ultra-low-power systems, threshold
detectors/discriminators, telemetry and remote systems, medical
instruments, or any other space-limited application with low power-
consumption requirements.
0.95A
1.2A
The AS1346-49 is available in a 12-Pin TDFN 3x3mm package.
Figure 1. AS1346 - Typical Application Diagram with POK Function
L1 = 3.3μH
VIN
VOUT1
3.3V 1200mA
2.7V to 5.5V
SW1
PVIN
COUT1
CIN
PVIN
FB1
AS1346
L2 = 3.3μH
VOUT2
1.8V 500mA
VDD
EN1
SW2
COUT2
FB2
POK Function
LBO
EN2
LBI
AGND
PGND
www.ams.com/DC-DC_Step-Down
Revision 1.10
1 - 16