Series AMLDL-Z
Up to 1000mA | LED Driver
General Specifications (continued)
Parameters
Maximum case temperature
Conditions
Typical
Maximum
Units
oC
100
Thermal Impedance
Cooling
Free air convection
+40
oC/W
Free air convection
Humidity
95
% RH
Case material
Non-Conductive Black Plastic (UL94-V0 rated)
2.6 (DIP14)
6.2 (DIP 16)
Weight
g
DIP 14
DIP 16
0.80 x 0.40 x 0.27 inches
0.92 x 0.55 x 0.40 inches
20.32 x 10.16 x 6.88 mm
23.37 x 13.97 x 10.16 mm
Dimensions (L x W x H)
MTBF
> 500 000hrs (MIL-HDBK-217 F at +25 oC)
Maximum Soldering Temperature
NOTES:
1.5mm from case for 10sec.
260
oC
1.Reversed polarity at the input power will damage the driver. The input ground must not be connected to the negative output.
2.Leave the pin VADJ opened if not used , grounding VADJ will shut the driver off, connecting VADJ to +Vin will damage the driver.
3.Maximum output open voltage is equal to input voltage
Safety Specifications
Parameters
Agency approvals
CE
Standards
EN 55015 (CISPR22)
IEC 61000-4-2 (Perf. Criteria A)
IEC 61000-4-3 (Perf. Criteria A)
IEC 61000-4-4 (Perf. Criteria A)
IEC 61000-4-6 (Perf. Criteria A)
IEC 61000-4-8 (Perf. Criteria A)
www.aimtec.com
F 051e R9.E
Tel: +1 514 620 2722
2 of 15
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only