Series AMLBW-Z
Up to 700mA | Step Up LED Driver
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Operating frequency
Depending on the model
360-380
KHz
AMLBW-3615Z
-40 to +85
AMLBW-3625Z; AMLBW-3630Z
AMLBW-3635Z
-40 to +80 (Vin 9-18V) / -40 to +85 (Vin 18-36V)
-40 to +75 (Vin 9-18V) / -40 to +85 (Vin 18-36V)
-40 to +70 (Vin 9-18V) / -40 to +80 (Vin 18-36V)
-40 to +70 (Vin 9-18V) / -40 to +75 (Vin 18-36V)
Operating temperature
oC
AMLBW-3650Z
AMLBW-3660Z; AMLBW-3670Z
Storage temperature
Maximum case temperature
Thermal Impedance
Cooling
-55 to +125
oC
oC
100
Depending on the model
+13.7 to +17
Free air convection
95
oC/W
Humidity
% RH
Case material
Weight
Non-Conductive Black Plastic (UL94-V0 rated)
38
g
Dimensions (L x W x H)
MTBF
Maximum Soldering Temperature
2.03 x 1.03 x 0.62 inches
> 860 000hrs (MIL-HDBK-217 F at +25 oC/Vin=9V,Vout=38V)
1.5mm from case for 10sec. 260
51.50 x 26.10 x 15.80 mm
oC
NOTES:
1. To prevent burning out the driver, the output voltage must be 5.0VDC higher than the input voltage
2. Do NOT exceed the maximum power ratings on each model
3. With output ripple being rather low, it is recommended not to increase the additional output capacitor so s not to increase the delay while starting up
under cool start conditions
4. This series offers protection in case the output is shorted. After the short occurs, thDe input current will be cut off and recovers when the short is removed
5. The reference value of under voltage protection (7.6V) means that under the condition of cool start and full discharge of output, the protection starts when
input voltage is lower than 7.6V
6. Note: PWM dimming means PWM signals are converted into mimic analog voltage by internal circuits and then do the dimming. The advantage of this
approach is to reduce the EMI
Safety Specifications
Parameters
EMI: Designed to meet EN 55022 Class B
Safety : Designed to meet IEC/EN 60950-1 , UL8750, IEC/EN 61347-2-13
Standards
Pin Out Specifications
Pin
1(Red)
Single
+Vi
+ DC Supply
PWM/Analog Dimming Control
Remote ON/OFF
2(White)
3(Blue)
4(Black)
5(Yellow)
6(Black)
DIM
EN
-Vi
+LED
-LED
-DC Supply
LED Anode connection
LED Cathode connection
www.aimtec.com
F 051e R12.C
Tel: +1 514 620 2722
2 of 8
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only