HN (AHN)
RATING
1. Coil data
1) DC coils
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal coil current
[ 20%]
Coil resistance
(at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
5V DC
6V DC
106.4mA
88.2mA
44.4mA
22.0mA
11.0mA
5.3mA
47Ω [ 10%]
68Ω [ 10%]
270Ω [ 10%]
1,090Ω [ 10%]
4,350Ω [ 10%]
18,870Ω [ 10%]
22,830Ω [ 10%]
12V DC
24V DC
48V DC
100V DC
110V DC
70%V or less of
nominal voltage
(Initial)
15%V or more of
nominal voltage
(Initial)
170%V of
nominal voltage
0.53W
4.8mA
2) AC coils (50/60Hz)
Nominal coil current [ 20%]
Nominal operating power
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
50Hz
93mA
60Hz
75mA
50Hz
60Hz
12V AC
24V AC
46.5mA
37.5mA
80%V or less of
nominal voltage
(Initial)
30%V or more of
nominal voltage
(Initial)
100/110V AC
110/120V AC
200/220V AC
220/240V AC
11.0/13.0mA
10.0/11.8mA
5.5/6.5mA
5.0/5.9mA
9.0/10.6mA
8.2/9.7mA
4.5/5.3mA
4.1/4.8mA
Approx.
1.1 to 1.4 V A
Approx.
0.9 to 1.2 V A
140%V of
nominal voltage
2. Specifications (Plug-in Standard type and TM type)
Characteristics
Item
Specifications
2 Form C
Arrangement
1 Form C
1 Form A (TM type)
Max. 100 mΩ
(By voltage drop 6 V DC 1A)
Max. 50 mΩ
(By voltage drop 6 V DC 1A)
Max. 100 mΩ
(By voltage drop 6 V DC 1A)
Contact
Contact resistance (Initial)
Contact material
AgSnO2 type
AgNi type
AgSnO2 type
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
10A 250V AC, 10A 30V DC
4,000VA, 300W
5A 250V AC, 5A 30V DC
1,250VA, 150W
16A 250V AC, 16A 30V DC
4,000VA, 480W
250V AC, 30V DC
Rating
16A (at AC load),
10A (at DC load)
Max. switching current
5A
16A
Nominal operating power
0.53W, 0.9VA
100mA 5V DC
Min. switching capacity (Reference value)*1
Insulation resistance (Initial)
Between open contacts
1mA 1V DC
100mA 5V DC
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1min. (Detection current: 10mA.)
Breakdown voltage
Between contact sets
(Initial)
3,000 Vrms for 1min.
(Detection current: 10mA.)
—
—
Electrical
characteristics
Between contact and coil
Temperature rise (coil) (at 70°C 158°F)
Operate time (at 20°C 68°F)*2
5,000 Vrms for 1min. (Detection current: 10mA.)
Max. 60°C 140°F (By resistive method, nominal coil voltage)
Max. 15ms (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 5ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without
diode)/Max. 20ms (with diode)
Release time (at 20°C 68°F)*2
Functional
Shock resistance
Min. 100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 1.5 mm
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical
AC: Min. 107; DC: Min. 2×107 (at 300 times/min.)
Min. 105 (at 20 times/min.)
Expected life
Electrical (at nominal switching capacity)
Min. 105 (at 10 times/min.)
Conditions for operation, transport and storage*3
(Not freezing and condensing at low temperature)
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
10 times/min.
(at nominal switching capacity)
Max. Operating speed
20 times/min. (at nominal switching capacity)
Approx. 19 g .67 oz Approx. 17 g .60 oz
Approx. 19 g .67 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. For the AC coil types, the operate/release time will differ depending on the phase.
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
ASCTB5E 201212-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
