AH175
Hall Effect Latch For High Temperature
Features
General Description
- Bipolar Hall effect latch sensor
- 3.5V to 20V DC operation voltage
- Open collector pre-driver
AH175 is a single-digital-output Hall-effect sensor
for high temperature operation. The device includes
an on-chip Hall voltage generator for magnetic
sensing, an amplifier to amplify Hall voltage, and a
comparator to provide switching hysteresis for noise
rejection, and an open-collector output pre-driver.
An internal bandgap regulator is used to provide
temperature compensated supply voltage for
internal circuits and allows a wide operating supply
range.
- 25mA output sink current
- Chip power reverse-connection protection
- Operating temperature: −40°C ~ +125°C
- Package: SIP3, SOT23
Applications
While the magnetic flux density (B) is larger than
threshold Bop, the OUT pin turns on (low). If B
removed toward Brp, the OUT pin is latched “on”
state prior to B < Brp. When B < Brp, the OUT pin
go into “ off ” state.
- Rotor position sensing
- Current switch
- Encoder
- RPM detection
Pin Assignment
Pin Descriptions
(Top view)
Name
Description
Input power
3.
OUT
VCC
GND
OUT
2. GND
1. VCC
Ground
Output stage
(SIP3 package)
3. OUT
1. VCC
( SOT23 package)
GND 2.
Ordering Information
AH175 X - X X X - X
Magnetic
Packing
Wafer Body
Package
Lead
Characteristics
A or B
Blank or
P: SIP3
W: SOT23
L : Lead Free
Blank: Normal
Blank : Tube
A~Z : if necessary
to specify
A
: Taping
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev. 0.7 May 7, 2004
1/6