AFBR-5103Z, AFBR-5103TZ, AFBR-5103AZ, AFBR-5103ATZ,
AFBR-5103PZ and AFBR-5103PEZ
FDDI, 100 Mbps ATM, and Fast Ethernet Transceivers
in Low Cost 1x9 Package Style
Data Sheet
Description
Features
FullCompliancewiththeOpticalPerformanceRequire-
The AFBR-5100Z family of transceivers from Avago Tech-
nologies provide the system designer with products to
implement a range of FDDI and ATM (Asynchronous
Transfer Mode) designs at the 100 Mbps/125 MBd rate.
ments of the FDDI PMD Standard
Full Compliance with the FDDI LCF-PMD Standard
FullCompliancewiththeOpticalPerformanceRequire-
The transceivers are all supplied in the new industry stan-
dard 1x9 SIP package style with either a duplex SC or a
duplex ST* connector interface.
ments of the ATM 100 Mbps Physical Layer
FullCompliancewiththeOpticalPerformanceRequire-
ments of 100 Base-FX Version of IEEE802.3u
FDDI PMD, ATM and Fast Ethernet 2000 m Backbone
Links
Multisourced 1x9 Package Style with Choice of Duplex
SC or Duplex ST* Receptacle
The AFBR-5103Z/-5103TZare 1300 nm products with Wave Solder and Aqueous Wash Process Compatible
optical performance compliant with the FDDI PMD
standard. The FDDI PMD standard is ISO/IEC 9314-3:
RoHS Compliance
1990 and ANSI X3.166 - 1990.
Applications
These transceivers for 2000 meter multimode fiber
backbones are supplied in the small 1x9 duplex SC or
ST package style for those designers who want to avoid
the larger MIC/R (Media Interface Connector/Receptacle)
defined in the FDDI PMD standard.
Multimode Fiber Backbone Links
Multimode Fiber Wiring Closet to Desktop Links
Multimode Fiber Media Converter
Note: The “T” in the product numbers indicates a transceiver with a
duplex ST connector receptacle. Product numbers without a “T” indicate
Avago Technologies also provides several other FDDI
products compliant with the PMD and SM-PMD stan-
transceivers with a duplex SC connector receptacle.
©
dards. These products are available with MIC/R, ST and
FC connector styles. They are available in the 1x13 and
2x11 transceiver and 16 pin transmitter/receiver package
styles for those designs that require these alternate con-
figurations.
The AFBR-5103Z/-5103TZ is also useful for both ATM 100
Mbps interfaces and Fast Ethernet 100 Base-FX inter-
faces. The ATM Forum User-Network Interface (UNI) Stan-
dard, Version 3.0, defines the Physical Layer for 100 Mbps
Multimode Fiber Interface for ATM in Section 2.3 to be
the FDDI PMD Standard. Likewise, the Fast Ethernet Al-
liance defines the Physical Layer for 100 Base-FX for Fast
Ethernet to be the FDDI PMD Standard.
*ST is a registered trademark of AT&T Lightguide Cable Connectors.