ADS1113
ADS1114
ADS1115
www.ti.com
SBAS444B –MAY 2009–REVISED OCTOBER 2009
Ultra-Small, Low-Power, 16-Bit
Analog-to-Digital Converter with Internal Reference
Check for Samples: ADS1113 ADS1114 ADS1115
1
FEATURES
DESCRIPTION
23
•
ULTRA-SMALL QFN PACKAGE:
The ADS1113, ADS1114, and ADS1115 are
precision analog-to-digital converters (ADCs) with 16
bits of resolution offered in an ultra-small, leadless
QFN-10 package or an MSOP-10 package. The
ADS1113/4/5 are designed with precision, power, and
ease of implementation in mind. The ADS1113/4/5
feature an onboard reference and oscillator. Data are
transferred via an I2C-compatible serial interface; four
I2C slave addresses can be selected. The
ADS1113/4/5 operate from a single power supply
ranging from 2.0V to 5.5V.
2mm × 1,5mm × 0,4mm
•
WIDE SUPPLY RANGE: 2.0V to 5.5V
•
LOW CURRENT CONSUMPTION:
Continuous Mode: Only 150μA
Single-Shot Mode: Auto Shut-Down
•
•
PROGRAMMABLE DATA RATE:
8SPS to 860SPS
INTERNAL LOW-DRIFT
VOLTAGE REFERENCE
The ADS1113/4/5 can perform conversions at rates
up to 860 samples per second (SPS). An onboard
PGA is available on the ADS1114 and ADS1115 that
offers input ranges from the supply to as low as
±256mV, allowing both large and small signals to be
measured with high resolution. The ADS1115 also
features an input multiplexer (MUX) that provides two
differential or four single-ended inputs.
•
•
•
•
INTERNAL OSCILLATOR
INTERNAL PGA
I2C™ INTERFACE: Pin-Selectable Addresses
FOUR SINGLE-ENDED OR TWO
DIFFERENTIAL INPUTS (ADS1115)
•
PROGRAMMABLE COMPARATOR
(ADS1114 and ADS1115)
The ADS1113/4/5 operate either in continuous
conversion mode or
a
single-shot mode that
APPLICATIONS
automatically powers down after a conversion and
greatly reduces current consumption during idle
periods. The ADS1113/4/5 are specified from –40°C
to +125°C.
•
•
•
•
•
PORTABLE INSTRUMENTATION
CONSUMER GOODS
BATTERY MONITORING
TEMPERATURE MEASUREMENT
FACTORY AUTOMATION AND PROCESS
CONTROLS
VDD
VDD
ADS1115
ADS1114
Comparator
ADS1113
Voltage
Reference
Voltage
Reference
ALERT/RDY
AIN0
AIN1
AIN2
AIN3
ADDR
ADDR
SCL
AIN0
I2C
Interface
16-Bit DS
I2C
Interface
16-Bit DS
SCL
PGA
MUX
ADC
ADC
AIN1
SDA
ADS1115
SDA
Only
Oscillator
GND
Oscillator
GND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
I2C is a trademark of NXP Semiconductors.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated