High Efficiency Integrated Power Solution
for Multicell Lithium Ion Applications
Data Sheet
ADP5080
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Wide input voltage range: 4.0 V to 15 V
High efficiency architecture
SCL
SDA
2
I C
OSCILLATOR
INTERFACE
Up to 2 MHz switching frequency
VOLTAGE
ENABLE
FAULT
6 synchronous rectification dc-to-dc converters
Channel 1 buck regulator: 3 A maximum
Channel 2 buck regulator: 1.15 A maximum
Channel 3 buck regulator: 1.5 A maximum
Channel 4 buck regulator: 0.8 A maximum
Channel 5 buck regulator: 2 A maximum
Channel 6 configurable buck or buck boost regulator
2 A maximum for buck regulator configuration
1.5 A maximum for buck boost regulator configuration
Channel 7 high voltage, high performance LDO regulator:
30 mA maximum
CONTROL
LOGIC
REFERENCE
CHARGE
PUMP
LDO1
4V TO 15V
5.0V TO 5.5V, 400mA
3V TO 3.3V, 300mA
0.80V TO 1.20V, 3A
1.0V TO 3.3V, 1.15A
1.2V TO 1.8V/ADJ, 1.5A
1.8V TO 3.55V/ADJ, 0.8A
3.0V TO 5.0V, 2A
LDO2
CH1 BUCK
REGULATOR
4V TO 15V
4V TO 15V
4V TO 15V
4V TO 15V
4V TO 15V
4V TO 15V
CH2 BUCK
REGULATOR
CH 3 BUCK
REGULATOR
CH 4 BUCK
REGULATOR
2 low quiescent current keep-alive LDO regulators
LDO1 regulator: 400 mA maximum
LDO2 regulator: 300 mA maximum
CH 5 BUCK
REGULATOR
CH 6
BUCK BOOST
REGULATOR
Control circuit
3.5V TO 5.5V/ADJ
BUCK ONLY: 2A
BUCK BOOST: 1.5A
Charge pump for internal switching driver power supply
I2C-programmable output levels and power sequencing
Package: 72-ball, 4.5 mm × 4.0 mm × 0.6 mm WLCSP
(0.5 mm pitch)
CH7 LDO
REGULATOR
5V TO 25V
5V TO 12V, 30mA
Figure 1.
APPLICATIONS
DSLR cameras
Non-reflex (mirrorless) cameras
Portable instrumentation
GENERAL DESCRIPTION
The ADP5080 is a fully integrated, high efficiency power
solution for multicell lithium ion battery applications. The
device can connect directly to the battery, which eliminates
the need for preregulators and, therefore, increases the battery
life of the system.
All these features help to minimize the number of external
components and PCB space required, providing significant
advantages for portable applications. The switching frequency
is selectable on each channel from 750 kHz to 2 MHz.
Key functions for power applications, such as soft start, selectable
preset output voltage, and flexible power-up and power-down
sequences, are provided on chip and are programmable via the
I2C interface with fused factory defaults. The ADP5080 is available
in a 72-ball WLCSP 0.5 mm pitch package.
The ADP5080 integrates two keep-alive LDO regulators, five
synchronous buck regulators, a configurable four-switch buck
boost regulator, and a high voltage LDO regulator. The ADP5080
is a highly integrated power solution that incorporates all power
MOSFETs, feedback loop compensation, voltage setting resistor
dividers, and discharge switches, as well as a charge pump to
generate a global bootstrap voltage.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2013–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com